| Customization: | Available |
|---|---|
| Condition: | New |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 | Max production paper width | 2200mm | 2 | Design speed | 200m/min |
| 3 | Three layers of work speed | 160-180m/min | 4 | Five layers of work speed | 140-160m/min |
| 5 | Vertical cut paper accuracy | ±1mm | 6 | Horizontal cutting accuracy | ±1mm |
Note |
The above speed index must be achieved: production width 2200mm, meet the following paper standards and ensure the surface temperature of the equipment is 175ºC. | ||||
| Face paper index | 100g/square metres--180g/square metres Circumpressure index(N.m/g)≥8 (Water content 8-10%) | ||||
| Core paper index | 80g/square metres--160g/square metres Circumpressure index(N.m/g)≥5.5 (Water content 8-10%) | ||||
| In the paper refers to | 90g/square metres--160g/square metres Circumpressure index(N.m/g)≥6 (Water content8-10%) | ||||
| 9 | Flute type combination | ||||
| 10 | Steam requirements | Max pressure16kg/cm2 | Wirking pressure 8-12kg/cm2 | Dosage4000kg/Hr | |
| 11 | Electricity demand | AC380V 50Hz 3PH | Installed capacity≈300KW | Commonly power≈180KW | |
| 12 | Compressed air | Max pressure 8kg/cm2 | Wirking pressure 5-7kg/cm2 | Dosage 1m³/min | |
| 13 | Space | ≈Lmin85m*Wmin8m*Hmin4.5m(Subject to the audited drawings provided by Party B) | |||
| 1, steam heating system: it is recommended to install a 4000 Kg / Hr steam boiler with a pressure of 1.25 Mpa steam pipeline. 2, air compressor, air pipeline, glue liquid conveying pipeline. 3, power supply, wire operation connected to the cabinet and line pipeline. 4, water source, water pipeline, bucket, etc. 5, water, electricity, gas foundation plane installation of civil engineering. 6, test run for base paper, corn (potato) starch, industrial caustic soda, borax and other materials. 7, equipment with oil, lubricating oil, hydraulic oil, grease. 8. Accommodation and local transportation expenses for the installation and debugging personnel. And provide the installation workers to cooperate with the installation. |
| Corrugated machine project list and price WJ200-2200-5layer corrugated paperboard production line |
|||
| Model | Name | Qty | Remarks |
| ZJ-V5B | Hydraulic mill stand | 5 sets | Spindle ¢ 240mm, hyperbolic heavy rocker arm, expansion paper holder, multipoint brake, hydraulic drive lift, left and right translation, to medium. The guide rail length is 9,000 mm, and the medium plate is welded. |
| Paper car | 10 sets | ||
| SF-360E | Cassette type single facer machine | 2 set | Corrugated roll ¢360mm,tungsten carbide , quick roll change in 10 minutes for electric cars, efficient and energy-saving synchronous belt transmission, use of maintenance free airbags for pressurization, 270 glue roller, PLC automatic glue control, and human-machine interface touch screen |
| MK-360 Corrugated quick change module |
4 gourp | The diameter of the corrugated roller is 360mm, tungsten carbide. The module part includes: shaft seats at both ends, bearings, steam components, suction boxes, pneumatic components, and other assemblies. The A.C.B.E. customer can choose. | |
| DY-C Electric hydraulic roller changing forklift | 1 set | Large capacity battery, electric walking, hydraulic lifting, centralized control | |
| RG-1-900 | Pre-heater machine | 4sets | Roller ¢ 900mm, electric adjustment package Angle. The envelope corner can adjust the heating area of the paper within 360°. |
| GM-20 | Double glue machine | 1sets | The diameter of the adhesive roller is 320mm. Independent frequency conversion motor drive, PLC adjustment of glue coating clearance and man-machine interface. |
| RG-1-900 | Triple preheater | 1sets | Roller ¢ 900mm, electric adjustment package Angle. The package Angle can adjust the heating area of the paper within the 360 range. |
| ZDF | Heavy transport across the bridge | 1sets | Main beam 200mm groove steel, independent frequency conversion motor drive pull paper conveying. |
| SM-F | Heavy double facer machine | 1sets | Rack 400 mm national standard groove steel, chrome-plated hot plate 600 mm * 18 pieces, hot plate surface fine grinding, roller type pressure paper design structure.converter motor. |
| FY-C | NC Slitter scorer | 1sets | Tungsten alloy blade,6 knife 10 scorer type. Full automatic computer arrange the knife,suction opening width automatic adjustment,1-2 second change tbe order |
| NC-200 | Spiral knife NC cutter off machine | 1sets | Full AC frequency conversion control, energy storage braking, die-cutting knife structure, oil-immersed gear transmission, 10-inch touch screen display. |
| DM-DL | Big hanging basket | 1sets | Accumulation height: 1800mm, hanging basket type stacking machine, can automatically count, automatic cross out, frequency conversion control lifting, baffle servo control positioning, automatic adjustment when changing orders. The paper conveyor belt is controlled by frequency conversion. |
| Air supply system | 1sets | Customers can bring their own gas source. | |
| ZJ | Rubber production station system | 1sets | Pipe customers shall bring themselves. The glue making device is composed of carrier tank, main tank, storage tank, glue pump and glue pump. |
| JZ-25 | Automatic splicer | 5set | Paper connection speed of 250 meters, the time of 1-2 seconds |
| ZQ | Steam system | 1set | Steam system components used in all GB valves.Including rotary joint,upper and lower dispenser.traps,pressure table and so on.Customer-owned boilers and pipes. |
| GL | boiler;furnace | 1set | Horizontal gas steam boiler, burner, Italian pilot. |
| Work width | 2200mm | |
| Paper diemeter | MAX: 1500mm MIN:300mm | |
| Paper width | MAX: 2200mm MIN:600mm | |
| Max.weigh | 3T | |
| Clip paper head | Tooth type 3 in 4 in | |
| Brake | Ddisc multipoint pneumatic | |
| Air pressure | 0.4---0.8Mpa | |
| Size | 4000*1800*1800 | |
| Weight | ≈3.5T |
| ★ Using the full hydraulic drive to complete the base paper clamping, loosening, moving to the middle, left and right translation and other actions, the base paper lifting by hydraulic drive. ★ The brake adopts multi-point braking system, tooth disc structure, equipped with heat dissipation fan, Adker pneumatic components, stable tension, super long life. ★ Large diameter spindle design, swing arm sliding stable, high frequency treatment with steel guide rail, super wear resistance, ★ hydraulic cylinder shaft type assembly, not under radial force, convenient maintenance. |
| Work pressure | Lift hydraulic cylinder | Clip the hydraulic cylinder | Motor power of the hydraulic station | Electromagnetic valve voltage |
| 16---18Mpa | ¢100×440mm | ¢63×1300mm | 3.7KW --380V -- 50Hz | 220V--50 Hz |
| Length | 9000mm | |
| Feeder paper way | Manual | |
| Frame | 14 channel steel and ¢ 20mm cold pull round steel | |
| Track slot | Single |
| ★ The whole track is buried, the main frame is no. 14 groove steel and ¢ 20mm cold pull round steel welding, the ground rail length is 6000mm. ★ Each paper rack with two paper cars from both sides of the paper at the same time. Push the roll paper in place. |
| Work wide | 2200MM | |
| Heat roller diameter | ¢900mm | |
| Package Angle adjustment range | 360 Rotation | |
| Pack Angle axis diameter | ¢86mm×2 | |
| The highest temperature of steam | 200ºC | |
| Maximum steam pressure | 1.2Mpa | |
| Working power supply | 380V 50Hz 3PH | |
| Power of motor | 250W Short-time (S2) working system |
| ★ Used for preheating single-side corrugated paper and surface paper, improve the temperature, conducive to bonding, water control, cardboard level off ★ The surface of each roller is fine grinding and coated with hard chromium treatment, with small surface friction and durable durability. ★ Electric adjustment Angle, the Angle can rotate in 360 range to adjust the paper heating area. ★ The preheating roller is designed with a flat sealing head. |
| No | Master name | Brand and origin | Remarks |
| 01 | Body frame | Tang steel profile | Stress removal of welding parts |
| 02 | Steam rotary joint | Tengzhou | |
| 03 | Preheat cylinder | Handan Steel or Jinan Iron and Steel | Q235B Pressure vessel board |
| 04 | With a bearing | Zhejiang five ring | |
| 05 | RV reduction box | Shandong Texas | RV75 |
| 06 | Main electrical appliances | Chint | Contactors, relays, and push-buttons |
| Working width | 2200mm | |
| Design speed | 200m/min | |
| Economy Speed | 150-180m/min | |
| Paper feeder width | 2200--600mm | |
| Maximum steam temperature | 200ºC | |
| Maximum steam pressure | 1.2Mpa | |
| Working power supply | 380V 50Hz 55KW |
| ★Main corrugating roller:¢ 360mm (varies depending on the type of corrugation), pressure roller ¢ 415mm, preheating roller ¢ 400mm. ★Adopting a negative pressure design with low heat loss, the core paper can be uniformly compressed and attached to the surface of the corrugated roller, making the corrugated better formed. Due to uniform pressure, the top of the corrugated paper can be better and evenly coated with glue, resulting in better adhesion of single sided corrugated paper. ★The corrugated roller is made of 48CrMo high-quality alloy steel, which has been quenched and tempered, medium frequency quenched, and the surface has been ground and plated with a surface hardness of HV1200 degrees or above. ★The corrugated roller, pressure roller, etc. adopt a highly stable cylinder control system, while also having a pneumatic control buffer effect. ★The glue amount control adopts electric adjustment, and the glue separation device is electric. ★The gluing system is not only convenient for cleaning, but also more conducive to maintenance and repair work. ★The simple operation and control system, touch screen operation interface, and color graphics display of operation status, function selection, fault indication, troubleshooting, and parameter setting all demonstrate that this machine is fully functional, easy to operate, and user-friendly. ★The built-in presetter is equipped with a spray system to adjust the temperature and moisture of the core paper. ★The main and auxiliary corrugated rollers and pressure roller bearings are all equipped with high-temperature lubricating grease to ensure bearing life and smooth operation. |
Part name technology |
specifications | material | Surface Treatment |
| Corrugated roll | Main roll ¢360mm | 48CrMAo alloy steel | tungsten carbide |
| Pressure roll | ¢405mm | 45# | Quenched circular grinding, chrome plating and polishing |
| Glue roll | ¢269mm | 45# | Circular grinding and indentation pattern chrome plating |
| Glue doctor roll | ¢153 mm | 45# | Circular grinding, chrome plating and polishing |
| Preheating roll | ¢400mm | Q235B | Circular grinding, chrome plating and polishing |
| Feeder paper roll | ¢110 mm | 45# | Circular grinding, chrome plating and polishing |
| Name | Power | voltage | frequency |
| Main drive variable frequency motor | 30KW | 380V | 50HZ |
| High voltage suction motor | 18.5KW | 380V | 50HZ |
| Glue mixing reducer | 100W | 380V | 50HZ |
| Glue adjustment motor | 200W*2 | 380V | 50HZ |
| Glue pump motor | 3.7KW | 380V | 50HZ |
| No. | Part name | Brand | Note |
| 01 | Frame | Self-produced | HT200 |
| 02 | Rotary joint and metal hose | Fujian Quanzhou Yujie | |
| 03 | Main drive motor | Hebei | 30KWfrequency motor |
| 04 | RV Reducer motor | Taiwan Chengbang or Wanxin | |
| 05 | bearing | C&U | |
| 06 | Mounted Bearings | Zhejiang Wuhuan | |
| 07 | High pressure fan | Tangshan Shangwei | 18.5KW |
| 08 | pneumatic components | Taiwan AirTac | |
| 09 | solenoid valve | Taiwan AirTac | |
| 10 | Low Voltage Apparatus | Chint | Contactor, relay, button |
| 11 | PLC frequency converter | Taiwan DELTA | |
| 12 | Touch Screen | Taiwan Weilun or MCGS |
| Work width | 2200MM | |
| Heat cylinder diameter | ¢900mm | |
| Package Angle adjustment range | 360°rotary | |
| Pack Angle axis diameter | ¢900mm×3 | |
| Max.steam temperature | 200ºC | |
| Max, pressure | 1.2Mpa |
| ★Used for preheating single corrugated paper and surface paper, improve temperature, conducive to bonding, water control, cardboard flat ★ roller surface fine grinding and hard chromium treatment, surface friction is small, durable. ★ Electric adjustment package Angle, package Angle can be rotated in 360° to adjust the heating area of the paper. ★ The preheating roller is designed with flat head, which meets the national standard of first-class pressure vessel, and is attached with the pressure vessel certificate.. |
| Work wide | 2200mm | |
| Design speed | 200m/min | |
| Number of bridge layers | 1 layer | |
| Tension correction control | Power driven | |
| working power supply | 380V 50Hz 12KW | |
| Equipment size | ||
| Weight |
| ★ The part of the bridge is the single-sided corrugated paper produced by the single-sided machine, lifting and transported to the glue machine after glue, into the double-sided machine fitting, slow transmission, with sufficient paper storage, convenient not to stop to change the paper sheet, the use of electric correction, automatic tension control, so that the single-sided corrugated paper alignment and tightening. ★ This part is the main beam for 16 channel steel, 16 I-steel, 63 horn steel, column and other connection, reasonable structure. High speed does not shake. Transportation, storage department shop galvanized steel plate, small friction, 2 sets of ladder, 1.2-inch safety guardrail on both sides. High intensity type pedal to ensure the safety of personnel and convenient operation. ★ Lift part of the independent frequency conversion drive. High strength without joint belt corrugated without indentation, upper slow long distance transmission, not easy to break paper. ★ Adjustable rollers are standard on both sides of the hydraulic support to ensure balanced tension at both ends of the paper and even preheating. |
| Name | Power | Voltage | Rate |
| Single-side corrugated lifting motor | 5.5KW | 380V | 50HZ |
| Bridge adsorption correction | 3KW | 380V | 50HZ |
| Piboard wide motor | 250W | 380V | 50HZ |
| No | Master name | Brand or origin | Remarks |
| 01 | Bridge main skeleton | Tiangang or Tanggang | No.16 channel steel, No.16 I-steel, No.12 channel steel, 63 horn steel, 40 * 80 square steel, etc. |
| 02 | Guardrail | Steel production | ¢42mm Low pressure fluid pipe |
| 03 | Paper lifting belt | Shanghai production | PVC Conveyer belt |
| 04 | Paper board conveyor belt | Hebei production | Parallel transfer of the rubber belt |
| 06 | Frequency changer | Taiwan Delta | |
| 07 | Bearing | human-oriented C&U | |
| 08 | With a bearing | Zhejiang five ring | |
| 09 | Paper-width adjustment speed reducer | Shandong gold does not change the speed reducer production | |
| 10 | Paper-loading motor (frequency conversion) | Hebei Hengshui Electric Motor Factory | |
| 11 | Delivery roll and paper roll, paper roll | Tiangsteel produces seamless steel pipe | chrome-faced |
| 12 | low-voltage apparatus | Chint | Contactors, relays, and push-buttons |
| Work width | 2200mm | |
| Design speed | 200m/min | |
| Economic speed | 150-180m/min | |
| Scope of glue adjustment | 0.08-0.6mm | |
| The number of net lines of coated roller | 32line | |
| Preheated cylinder temperature range | 150-200ºC | |
| Working power supply | 380V 50Hz 8KW | |
| Air supply system | 0.4-0.9Mpa | |
| Pressure tight way | Pneumatic |
| ★ Single-layer glue coating machine is the corrugated paper transported over the bridge, after preheating, again coated with glue, and then into the double-sided machine paste bonding, producing five layers of cardboard. ★ Rack cast iron structure, stable performance, upper and lower preheater diameter 320mm, improve the paper temperature is easy to glue paste, double pressure roller design coating uniform rubber, stainless steel rubber groove, automatic circulation rubber supply. ★ After adjusting the surface of the adhesive roller, the inner hole is processed, and the dynamic balance surface is finely ground and engraved with pit mesh pattern. Large diameter uniform rubber roller dynamic balance treatment, copper plate scraping rubber, rubber uniform and consistent, save glue, save steam, cardboard flat ★ The transmission of the adhesive coating unit is directly connected by the frequency conversion motor through the reducer, and controlled by the frequency conversion to ensure that the line speed of the adhesive coating roller is synchronized with the double-sided machine, and can operate independently. Using Angle sensor, PLC, touch screen human-machine interface display. According to different paper, different speed automatically control the amount of glue, according to different types automatically adjust the roller clearance, no accumulation error. |
Part name Technology |
Spec | Surfacing |
| Glue roller | ¢320mm | Round grinding embossed chrome plated |
| Gel roller | ¢140mm | Round ground chrome plated |
| Press roller | ¢140mm | Round ground chrome plated |
| Over the shaft | ¢70mm | Round ground chrome plated |
| Preheated cylinder (2) | ¢400mm | Round ground chrome plated |
| Name | Power | Voltage | Rate |
| Coding roller active motor | 5.5KW*1 | 380V | 50HZ |
| Rubber quantity adjustment speed reducer | 200W | 380V | 50HZ |
| Press the roller clearance adjustment motor | 200W | 380V | 50HZ |
| Rubber pump motor | 2.2KW | 380V | 50HZ |
| No | Master name | Brand or origin | Remarks |
| 01 | Coding roller and paste roller | Steel production | 45 Steel quality adjustment |
| 02 | preheat roll | Tiangang or Jinan Iron and Steel | Q235BContainer board |
| 03 | Bearing | human-oriented C&U | |
| 04 | With a bearing | Zhejiang five ring | |
| 05 | Pneumatic component | Brand | |
| 06 | low-voltage apparatus | Chint | Contactors, relays, and push-buttons |
| 07 | PLC and frequency converter | Taiwan Delta |
| Work wide | 2200mm | |
| Design speed | 200m/min | |
| Work speed | 150-180m/min | |
| Hot plate | 600mm×18 | |
| Length of cooling section | 7m | |
| Temperature requirement | 160-200ºC | |
| Vapo tension | 0.8-1.3Mpa | |
| Bleed pressure | 0.5-0.6Mpa | |
| working power supply | 380V 50Hz 70KW |
| ★ Double-sided machine is a single-sided corrugated paper and face paper joint, heating board heating, glue paste, finalize the production of flat cardboard. ★ The surface of the heating plate is grinding, the width of the hot plate is 600mm, a total of 18 heating plates, cooling setting length of 7 meters. The interior of the hot plate is the partition isolation structure, so that the steam is S-shaped flow, and the separation function of steam and water is obvious, which improves the utilization rate of steam. The heating plate is made of the container plate. ★ The hot plate adopts the pneumatic pressure plate structure. The pressure plate lifting adopts pneumatic structure and roller type touch pressure. ★ The thermal conductive piping of the heating plate is divided into multiple section to control the temperature. ★ The upper cotton belt is through the deviation correction pneumatic valve, manually corrected in the middle, using double cylinders to control the S-type cotton belt tensioning device. Large increase and tightness, ★ The lower belt adopts the pneumatic tensioning mechanism, and the structure is simple and practical. The left and right automatic correction of the lower conveyor belt is adjusted moderately, and can also be adjusted manually on both sides. ★ The surface of the drive roller is coated with wear-resistant rubber, with a human type structure, and with medium height, to ensure the smooth output of cardboard. ★ The drive part gear is made of cast steel ZG-500 material. ★ Electrical components adopt internationally famous brands, with stable operation and reliable operation. ★ The main drive motor is frequency conversion motor, low speed torque, wide range, energy saving and high efficiency. ★ The main skeleton adopts high strength national standard profile, firm structure, beautiful appearance, adapt to the high speed work. |
Part name Technology |
Spec | Surfacing |
| On the drive roller | ¢800mm | Cover wear-resistant rubber |
| Drive the rubber roller under | ¢600mm | Cover wear-resistant rubber |
| Front and rear driven roller | ¢200mm | Round ground chrome polished |
| Pressure belt roller | ¢120mm | Round ground chrome polished |
| Finalize the bracket | ¢120mm | Round ground chrome polished |
| Bring a tight roller | ¢120mm | Round ground chrome polished |
| The upper belt is adjusted with partial roller | ¢120mm | Round ground chrome polished |
| Upper and lower pressure belt axis | ¢120mm | Round ground chrome polished |
| Name | Power | Voltage | Rate |
| Main drive motor | 90KW | 380V | 50HZ |
| No | Master name | Brand or origin | Remarks |
| 01 | The backbone | Tiangang or Laigang produced profiles | 40 slot steel and 16 I-steel |
| 02 | Drive wall board | Handan, Hebei | Q345 |
| 03 | Heating plate | Tiangang or Jinan Iron and Steel | Q235BContainer board making |
| 04 | Main drive motor | Hengshui, Hebei | 90KWconverter motor |
| 05 | Cotton tape | Shenyang (in Liaoning Province) | Thick woven belt 9mm |
| 06 | Trap | Beijing drain valve door factory | Floating ball type |
| 07 | low-voltage apparatus | Chint | Contactors, relays, and push-buttons |
| 08 | pneumatic component;pneumatic element | Brand | |
| 09 | frequency transformer | Taiwan Delta | |
| 11 | Bearing | human-oriented C&U | |
| 12 | With a bearing | Zhejiang five ring |
| Work width | 2200mm | |
| Desigh speed | 200m/min | |
| Work speed | 180m/min | |
| Knife and score | 4 6 | |
| Min. Cut paper | 160mm | |
| Min. Crease width | 70mm | |
| Positioning accuracy ofthe cutter and wire wheel | ±0.5mm | |
| Machine move | ±100mm |
| Work wide | 2200mm | |
| Design speed | 200m/min | |
| Work speed | 150-180m/min | |
| Minimum cut paper length | 500mm | |
| Maximum paper cutting length | 9999mm | |
| Cutting paper accuracy | Uniform speed±1mm, | |
| working power supply | 380V 50Hz 50KW | |
| Equipment size | ||
| Weight |
| ★ Can store 200 sets of orders, change the paper cutting specifications quickly and accurately, do not stop the order, and can realize the computer networking, convenient production management. ★ The knife shaft drive gear adopts precision forging steel material high frequency quenching, realize no side gap transmission, using advanced bond-free connection mode, high transmission precision. ★ The front and rear paper delivery wheels are using the sun wheel paper pressing mode, smooth delivery, uniform pressure, not easy to crush the board or cause blockage. ★ This model is the energy storage type brake (non-energy consumption brake), low energy consumption in the production process, the average electricity consumption is 1 / 3 of the ordinary NC cutting machine, saving more than 70% of the power, to achieve the goal of saving money. ★ Precision adjustable markless gear to ensure the precise engagement of the blade and balanced operation. ★ Oil bed type lubrication is distributed in each gear position for oil supply, lubrication and cooling. ★ Tool roll: high quality fine forged steel quality, after balance treatment, with good stability. |
Part name Technology |
Spec | Surfacing | Special handling |
| Cross-cut the upper and lower knife shaft | ¢200mm | Tempering | Dynamic balance |
| Front and bottom transfer roller | ¢150mm | Round ground chrome polished | Dynamic balance |
| After the lower transfer roller | ¢150mm | Round ground chrome polished | Dynamic balance |
| Lead the paper shaft | ¢160mm | Package of silica gel | Dynamic balance |
| Output solar wheel | ¢160mm | Polyurethane | Intensive |
| Name | Power | Voltage | Rate |
| Main drive frequency conversion motor | 42KW | 380V | 50HZ |
| Paper transfer motor | 3.7KW( frequency control ) | 380V | 50HZ |
| No | Master name | Brand or origin | Remarks |
| 01 | Box frame | Self-produced | HT250 |
| 02 | Knife roll | Tiangang fine forging | 42CrMo |
| 03 | Full AC private service motor | East force | 42KW |
| 04 | Transmission paper frequency conversion motor | Hebei Hengshui Yongshun Electric Motor Factory | |
| 05 | Flying-shear servo control system | Ying wei teng | |
| 09 | Up tight set | Xianyang beyond | |
| 10 | With a bearing | Zhejiang five ring | |
| 11 | low-voltage apparatus | Chint | Contactors, relays, and push-buttons |
| Work width | 2200mm | |
| Design speed | 200m/min | |
| Work speed | 180m/min | |
| Maximum accumulation length | 2500mm | |
| Maximum accumulation height | 300mm | |
| working power supply | 380V 50Hz 25KW | |
| Equipment size |
| Basket type stacking machine, stacking height: 1800mm Can automatically count, automatic cross out, frequency conversion control lifting, baffle servo control positioning, automatic adjustment when changing the order. The paper conveying belt is controlled by frequency conversion control. The material of the first section and the fourth section of the pressure strip is made of carbon fiber rods, and the pneumatic rise and fall is controlled. The hanging basket section is a module with an output, with a section of the module with a paper connecting platform. Mechanical host: beam, column use of high quality heavy I-steel, channel steel, square pipe, surface sand grinding, spray paint; The conveying roller adopts high-quality seamless steel pipe, with precision machining and dynamic balance correction: Pneumatic system: Zhejiang Tianao cylinder, solenoid valve, pneumatic valve, pressure regulating valve, triad and other pneumatic components. Control system: conveying section conveying motor: Taibang precision gear reduction motor, Taiwan Delta frequency converter. Platform lifting control, Taiwan Delta frequency conversion controller; transverse paper delivery motor: Taiwan precision worm wheel deceleration motor; transverse paper delivery control: Taiwan Delta frequency conversion controller; rear baffle position adjustment motor: Taiwan Delta servo motor; rear baffle position adjustment control: Taiwan Delta AC servo controller; operation monitoring: Kunlun Zhongtai color touch screen; Detection and control: Taiwan Delta PLC, Omron proximity switch, photoelectric switch. Low voltage electrical: Schne ider and Siemens AC contactors, circuit breakers, relays, switch buttons, etc. Test pulse switch: Omron. Laser ranging sensor is made in Germany |
| No | Master name | Brand or origin | Remarks |
| 01 | Body frame | TianGang | Main frame # 16 channel steel |
| 02 | PU leather belt | Tianjin production | |
| 03 | Frequency changer | Taiwan Delta | 3.7KW |
| 04 | Across the reducer | Shandong Jinzhan speed reducer | |
| 05 | Contactor | Chint | |
| 06 | Roll shaft | Steel seamless steel pipe |
| Manual maximum amount of glue made | 0.8T | |
| The method of glue making | one-step method;one-step process | |
| The main body stirring | Horizontal stirring | |
| The carrier stirring |
Vertical stirring | |
| Storage tank reserves | 1T | |
| working power supply | 380V 50Hz 10KW | |
| Equipment size |
| ★ To provide starch adhesive for single-sided corrugated machine, glue coating machine and other glue equipment. Delivery through the rubber pump pipeline. The rubber making device is composed of carrier tank, main tank, storage tank, rubber delivery pump, rubber return pump, etc. ★ Horizontal rubber machine can prepare the main body glue and carrier glue at the same time, and mixing, large amount of rubber. The glue liquid of the rubber making room is transported to the storage bucket of each rubber equipment by the rubber pump to provide the glue liquid for the equipment. ★ The rubber system adopts circulating glue supply, the residual glue flows into the rubber square bucket, and the liquid level floating ball is automatically controlled. |
| Part name parameter |
specifications;norms;standard;format;spec | Material | Power | remarks;comments on a form;remark |
| Horizontal main body glue mixer | 1200mm×1000mm×900mm | Q345 | 4KW | Hebei Hengshui Motor |
| Vector glue mixer | ¢800mm×900mm | Q345 | 1.5KW | Hebei Hengshui Motor |
| Single-sided machine, apply the glue on the rubber bucket | ¢800mm×1000mm | Q345 | ||
| Storage glue bucket | ¢1200mm×1200mm | Q345 | 1.5KW | Hebei Hengshui Motor |
| Rubber pump motor | DN40 | HT200 | 2.2KW | Hebei Hengshui Motor |
| low-voltage apparatus | Chint | Contactors, relays, and push-buttons |
| Work width | 2200mm | |
| Design speed | 200m/min | |
| Work speed | 200m/min | |
| Splicer time | 0-200M/ | |
| Air system | 0.4-0.9Mpa |
| Technical parameters paper speed: 0-200M / minute (suitable for the quality of base paper) paper time: about 1 second running speed: 0-200M / minute applicable paper gram weight: 90-320g / m2 maximum drum diameter: Φ1500mm l working pressure: 0.6-0.9MPa double-sided tape width: 30mm PLC control system, man-machine interface operation, paper connection operation success rate of more than 99% using magnetic powder clutch automatic control. Buffered roller chain drive walk. Zero paper tail paper, new and old paper only 3cm dry adhesive mouth. Paper rod and tooth cutting knife integrated structure, paper and cutting one step to complete. |
){kind=link}