Corrugated Carton Making Machine Corrugated Cardboard Box Making Corrugated Paperboard Production Line

• Customization: Available
• Condition: New
• Certification: CE
• Automation: Automatic
• Suitable for: Paper
• Paper Thickness: Thick Paper
• Heating System: Steam Heating
• Width: 1800mm
• Layer: 5 Layer
• Design Speed: 120m/Min
• Working Speed: 80m/Min
• Single Facer Type: Vacuum Absorbable
• Corrugated Roller Material: 48crmo High Quality Alloy Steel
• Flute Type: Acbe as Customer Requirements
• Electric Appliance: Imported Famous Brand
• Transport Package: Plastic Film Wrapping Outside, Container
• Specification: Corrugated type: A, B, C, E Optional
• Trademark: CZXY
• Origin: Cangzhou City, Hebei Province
• HS Code: 8441809000
• Production Capacity: 3-5sets/Month

Product Description

WJ 200-2200- 5layer corrugated board production line:

1	Max production paper width	2200mm	2	Design speed	200m/min
3	Three layers of work speed	160-180m/min	4	Five layers of work speed	140-160m/min
5	Vertical cut paper accuracy	±1mm	6	Horizontal cutting accuracy	±1mm
Note	The above speed index must be achieved: production width 2200mm, meet the following paper standards and ensure the surface temperature of the equipment is 175ºC.
	Face paper index	100g/square metres--180g/square metres  Circumpressure index(N.m/g)≥8    (Water content 8-10%)
	Core paper index	80g/square metres--160g/square metres   Circumpressure index(N.m/g)≥5.5  (Water content 8-10%)
	In the paper refers to	90g/square metres--160g/square metres   Circumpressure index(N.m/g)≥6    (Water content8-10%)
9	Flute type combination
10	Steam requirements	Max pressure16kg/cm2		Wirking pressure 8-12kg/cm2	Dosage4000kg/Hr
11	Electricity demand	AC380V 50Hz 3PH		Installed capacity≈300KW	Commonly power≈180KW
12	Compressed air	Max pressure 8kg/cm2		Wirking pressure 5-7kg/cm2	Dosage 1m³/min
13	Space	≈Lmin85m*Wmin8m*Hmin4.5m(Subject to the audited drawings provided by Party B)

Customer self-provided part:

1, steam heating system: it is recommended to install a 4000 Kg / Hr steam boiler with a pressure of 1.25 Mpa steam pipeline.
2, air compressor, air pipeline, glue liquid conveying pipeline.
3, power supply, wire operation connected to the cabinet and line pipeline.
4, water source, water pipeline, bucket, etc.
5, water, electricity, gas foundation plane installation of civil engineering.
6, test run for base paper, corn (potato) starch, industrial caustic soda, borax and other materials.
7, equipment with oil, lubricating oil, hydraulic oil, grease.
8. Accommodation and local transportation expenses for the installation and debugging personnel. And provide the installation workers to cooperate with the installation.

 

Corrugated machine project list and price WJ200-2200-5layer corrugated paperboard production line
Model	Name	Qty	Remarks
ZJ-V5B	Hydraulic mill stand	5 sets	Spindle ¢ 240mm, hyperbolic heavy rocker arm, expansion paper holder, multipoint brake, hydraulic drive lift, left and right translation, to medium. The guide rail length is 9,000 mm, and the medium plate is welded.
	Paper car	10 sets
SF-360E	Cassette type single facer machine	2 set	Corrugated roll ¢360mm,tungsten carbide , quick roll change in 10 minutes for electric cars, efficient and energy-saving synchronous belt transmission, use of maintenance free airbags for pressurization, 270 glue roller, PLC automatic glue control, and human-machine interface touch screen
	MK-360 Corrugated quick change module	4 gourp	The diameter of the corrugated roller is 360mm, tungsten carbide. The module part includes: shaft seats at both ends, bearings, steam components, suction boxes, pneumatic components, and other assemblies. The A.C.B.E. customer can choose.
	DY-C Electric hydraulic roller changing forklift	1 set	Large capacity battery, electric walking, hydraulic lifting, centralized control
RG-1-900	Pre-heater machine	4sets	Roller ¢ 900mm, electric adjustment package Angle. The envelope corner can adjust the heating area of the paper within 360°.
GM-20	Double  glue machine	1sets	The diameter of the adhesive roller is 320mm. Independent frequency conversion motor drive, PLC adjustment of glue coating clearance and man-machine interface.
RG-1-900	Triple preheater	1sets	Roller ¢ 900mm, electric adjustment package Angle. The package Angle can adjust the heating area of the paper within the 360 range.
ZDF	Heavy transport across the bridge	1sets	Main beam 200mm groove steel, independent frequency conversion motor drive pull paper conveying.
SM-F	Heavy double facer machine	1sets	Rack 400 mm national standard groove steel, chrome-plated hot plate 600 mm * 18 pieces, hot plate surface fine grinding, roller type pressure paper design structure.converter motor.
FY-C	NC Slitter scorer	1sets	Tungsten alloy blade,6 knife 10 scorer type. Full automatic computer arrange the knife,suction opening width automatic adjustment,1-2 second change tbe order
NC-200	Spiral knife NC cutter off machine	1sets	Full AC frequency conversion control, energy storage braking, die-cutting knife structure, oil-immersed gear transmission, 10-inch touch screen display.
DM-DL	Big hanging basket	1sets	Accumulation height: 1800mm, hanging basket type stacking machine, can automatically count, automatic cross out, frequency conversion control lifting, baffle servo control positioning, automatic adjustment when changing orders. The paper conveyor belt is controlled by frequency conversion.
	Air supply system	1sets	Customers can bring their own gas source.
ZJ	Rubber production station system	1sets	Pipe customers shall bring themselves. The glue making device is composed of carrier tank, main tank, storage tank, glue pump and glue pump.
JZ-25	Automatic splicer	5set	Paper connection speed of 250 meters, the time of 1-2 seconds
ZQ	Steam system	1set	Steam system components used in all GB valves.Including rotary joint,upper and lower dispenser.traps,pressure table and so on.Customer-owned boilers and pipes.
GL	boiler;furnace	1set	Horizontal gas steam boiler, burner, Italian pilot.

1,ZJ-V5B Hydraulic mill stand
A,technical parameter:

Work width	2200mm
Paper diemeter	MAX: 1500mm MIN:300mm
Paper width	MAX: 2200mm MIN:600mm
Max.weigh	3T
Clip paper head	Tooth type 3 in 4 in
Brake	Ddisc multipoint pneumatic
Air pressure	0.4---0.8Mpa
Size	4000*1800*1800
Weight	≈3.5T

1. Main performance features:

★ Using the full hydraulic drive to complete the base paper clamping, loosening, moving to the middle, left and right translation and other actions, the base paper lifting by hydraulic drive.
★ The brake adopts multi-point braking system, tooth disc structure, equipped with heat dissipation fan, Adker pneumatic components, stable tension, super long life.
★ Large diameter spindle design, swing arm sliding stable, high frequency treatment with steel guide rail, super wear resistance,
★ hydraulic cylinder shaft type assembly, not under radial force, convenient maintenance.

1. Hydraulic system parameters:

Work pressure	Lift hydraulic cylinder	Clip the hydraulic cylinder	Motor power of the hydraulic station	Electromagnetic valve voltage
16---18Mpa	¢100×440mm	¢63×1300mm	3.7KW --380V -- 50Hz	220V--50 Hz

2,Paper car

1. technical parameter:

Length	9000mm
Feeder paper way	Manual
Frame	14 channel steel and ¢ 20mm cold pull round steel
Track slot	Single

1. Main performance features:

★ The whole track is buried, the main frame is no. 14 groove steel and ¢ 20mm cold pull round steel welding, the ground rail length is 6000mm.
★ Each paper rack with two paper cars from both sides of the paper at the same time. Push the roll paper in place.

3,R900B pre-heater machine
A,Technical parameter:

Work wide	2200MM
Heat roller diameter	¢900mm
Package Angle adjustment range	360 Rotation
Pack Angle axis diameter	¢86mm×2
The highest temperature of steam	200ºC
Maximum steam pressure	1.2Mpa
Working power supply	380V    50Hz    3PH
Power of motor	250W Short-time (S2) working system

1. Main performance features:

★ Used for preheating single-side corrugated paper and surface paper, improve the temperature, conducive to bonding, water control, cardboard level off
★ The surface of each roller is fine grinding and coated with hard chromium treatment, with small surface friction and durable durability.
★ Electric adjustment Angle, the Angle can rotate in 360 range to adjust the paper heating area.
★ The preheating roller is designed with a flat sealing head.

C,Main parts brand and origin

No	Master name	Brand and origin	Remarks
01	Body frame	Tang steel profile	Stress removal of welding parts
02	Steam rotary joint	Tengzhou
03	Preheat cylinder	Handan Steel or Jinan Iron and Steel	Q235B Pressure vessel board
04	With a bearing	Zhejiang five ring
05	RV reduction box	Shandong Texas	RV75
06	Main electrical appliances	Chint	Contactors, relays, and push-buttons

4,SF-360E Cassette type single facer machine
A,Technical Parameter:

Working width	2200mm
Design speed	200m/min
Economy Speed	150-180m/min
Paper feeder width	2200--600mm
Maximum steam temperature	200ºC
Maximum steam pressure	1.2Mpa
Working power supply	380V    50Hz    55KW

B,Main performance characteristics:

★Main corrugating roller:¢ 360mm (varies depending on the type of corrugation), pressure roller ¢ 415mm, preheating roller ¢ 400mm.
★Adopting a negative pressure design with low heat loss, the core paper can be uniformly compressed and attached to the surface of the corrugated roller, making the corrugated better formed. Due to uniform pressure, the top of the corrugated paper can be better and evenly coated with glue, resulting in better adhesion of single sided corrugated paper.
★The corrugated roller is made of 48CrMo high-quality alloy steel, which has been quenched and tempered, medium frequency quenched, and the surface has been ground and plated with a surface hardness of HV1200 degrees or above.
★The corrugated roller, pressure roller, etc. adopt a highly stable cylinder control system, while also having a pneumatic control buffer effect.
★The glue amount control adopts electric adjustment, and the glue separation device is electric.
★The gluing system is not only convenient for cleaning, but also more conducive to maintenance and repair work.
★The simple operation and control system, touch screen operation interface, and color graphics display of operation status, function selection, fault indication, troubleshooting, and parameter setting all demonstrate that this machine is fully functional, easy to operate, and user-friendly.
★The built-in presetter is equipped with a spray system to adjust the temperature and moisture of the core paper.
★The main and auxiliary corrugated rollers and pressure roller bearings are all equipped with high-temperature lubricating grease to ensure bearing life and smooth operation.

C,Main component parameters:

Part name technology	specifications	material	Surface Treatment
Corrugated roll	Main roll ¢360mm	48CrMAo alloy steel	tungsten carbide
Pressure roll	¢405mm	45#	Quenched circular grinding, chrome plating and polishing
Glue roll	¢269mm	45#	Circular grinding and indentation pattern chrome plating
Glue doctor roll	¢153 mm	45#	Circular grinding, chrome plating and polishing
Preheating roll	¢400mm	Q235B	Circular grinding, chrome plating and polishing
Feeder paper roll	¢110 mm	45#	Circular grinding, chrome plating and polishing

D,Main power parameters:

Name	Power	voltage	frequency
Main drive variable frequency motor	30KW	380V	50HZ
High voltage suction motor	18.5KW	380V	50HZ
Glue mixing reducer	100W	380V	50HZ
Glue adjustment motor	200W*2	380V	50HZ
Glue pump motor	3.7KW	380V	50HZ

1. Brand and origin of main components:

No.	Part name	Brand	Note
01	Frame	Self-produced	HT200
02	Rotary joint and metal hose	Fujian Quanzhou Yujie
03	Main drive motor	Hebei	30KWfrequency motor
04	RV Reducer motor	Taiwan Chengbang or Wanxin
05	bearing	C&U
06	Mounted Bearings	Zhejiang Wuhuan
07	High pressure fan	Tangshan Shangwei	18.5KW
08	pneumatic components	Taiwan AirTac
09	solenoid valve	Taiwan AirTac
10	Low Voltage Apparatus	Chint	Contactor, relay, button
11	PLC  frequency converter	Taiwan DELTA
12	Touch Screen	Taiwan Weilun or MCGS

5,R900B Double Preheater
A,technical parameter:

Work width	2200MM
Heat cylinder diameter	¢900mm
Package Angle adjustment range	360°rotary
Pack Angle axis diameter	¢900mm×3
Max.steam temperature	200ºC
Max, pressure	1.2Mpa

1. Main performance features:

★Used for preheating single corrugated paper and surface paper, improve temperature, conducive to bonding, water control, cardboard flat
★ roller surface fine grinding and hard chromium treatment, surface friction is small, durable.
★ Electric adjustment package Angle, package Angle can be rotated in 360° to adjust the heating area of the paper.
★ The preheating roller is designed with flat head, which meets the national standard of first-class pressure vessel, and is attached with the pressure vessel certificate..

6,ZDF-2200 Transport across the bridge
A,Technical parameter:

Work wide	2200mm
Design speed	200m/min
Number of bridge layers	1 layer
Tension correction control	Power driven
working power supply	380V  50Hz   12KW
Equipment size
Weight

B,Main performance features:

★ The part of the bridge is the single-sided corrugated paper produced by the single-sided machine, lifting and transported to the glue machine after glue, into the double-sided machine fitting, slow transmission, with sufficient paper storage, convenient not to stop to change the paper sheet, the use of electric correction, automatic tension control, so that the single-sided corrugated paper alignment and tightening.
★ This part is the main beam for 16 channel steel, 16 I-steel, 63 horn steel, column and other connection, reasonable structure. High speed does not shake. Transportation, storage department shop galvanized steel plate, small friction, 2 sets of ladder, 1.2-inch safety guardrail on both sides. High intensity type pedal to ensure the safety of personnel and convenient operation.
★ Lift part of the independent frequency conversion drive. High strength without joint belt corrugated without indentation, upper slow long distance transmission, not easy to break paper.
★ Adjustable rollers are standard on both sides of the hydraulic support to ensure balanced tension at both ends of the paper and even preheating.

C,Main power parameters:

Name	Power	Voltage	Rate
Single-side corrugated lifting motor	5.5KW	380V	50HZ
Bridge adsorption correction	3KW	380V	50HZ
Piboard wide motor	250W	380V	50HZ

E,Main parts brand and origin:

No	Master name	Brand or origin	Remarks
01	Bridge main skeleton	Tiangang or Tanggang	No.16 channel steel, No.16 I-steel, No.12 channel steel, 63 horn steel, 40 * 80 square steel, etc.
02	Guardrail	Steel production	¢42mm Low pressure fluid pipe
03	Paper lifting belt	Shanghai production	PVC Conveyer belt
04	Paper board conveyor belt	Hebei production	Parallel transfer of the rubber belt
06	Frequency changer	Taiwan Delta
07	Bearing	human-oriented C&U
08	With a bearing	Zhejiang five ring
09	Paper-width adjustment speed reducer	Shandong gold does not change the speed reducer production
10	Paper-loading motor (frequency conversion)	Hebei Hengshui Electric Motor Factory
11	Delivery roll and paper roll, paper roll	Tiangsteel produces seamless steel pipe	chrome-faced
12	low-voltage apparatus	Chint	Contactors, relays, and push-buttons

7,GM-20 Single gluer machine
A,Technical parameter:

Work width	2200mm
Design speed	200m/min
Economic speed	150-180m/min
Scope of glue adjustment	0.08-0.6mm
The number of net lines of coated roller	32line
Preheated cylinder temperature range	150-200ºC
Working power supply	380V  50Hz   8KW
Air supply system	0.4-0.9Mpa
Pressure tight way	Pneumatic

B,Main performance features:

★ Single-layer glue coating machine is the corrugated paper transported over the bridge, after preheating, again coated with glue, and then into the double-sided machine paste bonding, producing five layers of cardboard.
★ Rack cast iron structure, stable performance, upper and lower preheater diameter 320mm, improve the paper temperature is easy to glue paste, double pressure roller design coating uniform rubber, stainless steel rubber groove, automatic circulation rubber supply.
★ After adjusting the surface of the adhesive roller, the inner hole is processed, and the dynamic balance surface is finely ground and engraved with pit mesh pattern. Large diameter uniform rubber roller dynamic balance treatment, copper plate scraping rubber, rubber uniform and consistent, save glue, save steam, cardboard flat
★ The transmission of the adhesive coating unit is directly connected by the frequency conversion motor through the reducer, and controlled by the frequency conversion to ensure that the line speed of the adhesive coating roller is synchronized with the double-sided machine, and can operate independently. Using Angle sensor, PLC, touch screen human-machine interface display. According to different paper, different speed automatically control the amount of glue, according to different types automatically adjust the roller clearance, no accumulation error.

C,Main component parameters:

Part name Technology	Spec	Surfacing
Glue roller	¢320mm	Round grinding embossed chrome plated
Gel roller	¢140mm	Round ground chrome plated
Press roller	¢140mm	Round ground chrome plated
Over the shaft	¢70mm	Round ground chrome plated
Preheated cylinder (2)	¢400mm	Round ground chrome plated

1. Main power parameters:

Name	Power	Voltage	Rate
Coding roller active motor	5.5KW*1	380V	50HZ
Rubber quantity adjustment speed reducer	200W	380V	50HZ
Press the roller clearance adjustment motor	200W	380V	50HZ
Rubber pump motor	2.2KW	380V	50HZ

E,Main parts brand and origin:

No	Master name	Brand or origin	Remarks
01	Coding roller and paste roller	Steel production	45 Steel quality adjustment
02	preheat roll	Tiangang or Jinan Iron and Steel	Q235BContainer board
03	Bearing	human-oriented C&U
04	With a bearing	Zhejiang five ring
05	Pneumatic component	Brand
06	low-voltage apparatus	Chint	Contactors, relays, and push-buttons
07	PLC and frequency converter	Taiwan Delta

8,SM-F Double facer machine
A,Technical parameter:

Work wide	2200mm
Design speed	200m/min
Work speed	150-180m/min
Hot plate	600mm×18
Length of cooling section	7m
Temperature requirement	160-200ºC
Vapo tension	0.8-1.3Mpa
Bleed pressure	0.5-0.6Mpa
working power supply	380V  50Hz   70KW

B,Main performance features:

★ Double-sided machine is a single-sided corrugated paper and face paper joint, heating board heating, glue paste, finalize the production of flat cardboard.
★ The surface of the heating plate is grinding, the width of the hot plate is 600mm, a total of 18 heating plates, cooling setting length of 7 meters. The interior of the hot plate is the partition isolation structure, so that the steam is S-shaped flow, and the separation function of steam and water is obvious, which improves the utilization rate of steam. The heating plate is made of the container plate.
★ The hot plate adopts the pneumatic pressure plate structure. The pressure plate lifting adopts pneumatic structure and roller type touch pressure.
★ The thermal conductive piping of the heating plate is divided into multiple section to control the temperature.
★ The upper cotton belt is through the deviation correction pneumatic valve, manually corrected in the middle, using double cylinders to control the S-type cotton belt tensioning device. Large increase and tightness,
★ The lower belt adopts the pneumatic tensioning mechanism, and the structure is simple and practical. The left and right automatic correction of the lower conveyor belt is adjusted moderately, and can also be adjusted manually on both sides.
★ The surface of the drive roller is coated with wear-resistant rubber, with a human type structure, and with medium height, to ensure the smooth output of cardboard.
★ The drive part gear is made of cast steel ZG-500 material.
★ Electrical components adopt internationally famous brands, with stable operation and reliable operation.
★ The main drive motor is frequency conversion motor, low speed torque, wide range, energy saving and high efficiency.
★ The main skeleton adopts high strength national standard profile, firm structure, beautiful appearance, adapt to the high speed work.

C,Main component parameters:

Part name Technology	Spec	Surfacing
On the drive roller	¢800mm	Cover wear-resistant rubber
Drive the rubber roller under	¢600mm	Cover wear-resistant rubber
Front and rear driven roller	¢200mm	Round ground chrome polished
Pressure belt roller	¢120mm	Round ground chrome polished
Finalize the bracket	¢120mm	Round ground chrome polished
Bring a tight roller	¢120mm	Round ground chrome polished
The upper belt is adjusted with partial roller	¢120mm	Round ground chrome polished
Upper and lower pressure belt axis	¢120mm	Round ground chrome polished

D,Main power parameters:

Name	Power	Voltage	Rate
Main drive motor	90KW	380V	50HZ

E,Main parts brand and origin:

No	Master name	Brand or origin	Remarks
01	The backbone	Tiangang or Laigang produced profiles	40 slot steel and 16 I-steel
02	Drive wall board	Handan, Hebei	Q345
03	Heating plate	Tiangang or Jinan Iron and Steel	Q235BContainer board making
04	Main drive motor	Hengshui, Hebei	90KWconverter motor
05	Cotton tape	Shenyang (in Liaoning Province)	Thick woven belt 9mm
06	Trap	Beijing drain valve door factory	Floating ball type
07	low-voltage apparatus	Chint	Contactors, relays, and push-buttons
08	pneumatic component;pneumatic element	Brand
09	frequency transformer	Taiwan Delta
11	Bearing	human-oriented C&U
12	With a bearing	Zhejiang five ring

9,NC Slitter scorer
A,technical parameter:

Work width	2200mm
Desigh speed	200m/min
Work speed	180m/min
Knife and score	4  6
Min. Cut paper	160mm
Min. Crease width	70mm
Positioning accuracy ofthe cutter and wire wheel	±0.5mm
Machine move	±100mm

NC slitter scorer
Product overview:As an important equipment of corrugated cadres,complete the high quality line of cardboard and precise cutting and the size is very precise.Adopt computer-controlled,automatic change order,and reduce waste,improve work efficiency.
Function and Characteristic:
1.High quality touch screen and PLC equipped composing the CNC system,connect to the production line.
2.High quality beeline rail and high-precision screw conveying guarantees the precision.
3.  A memory of orders,realize non-stop automatic or manual change.
4.Speed synchronizes with board speed.Standard communication interface,easy to link with management system.
5.Alloyed steel thin-blades,sharp and long life of over 8 million meters,auto sharpening
6.The knife for computer control automatic or manual knife sharpening,edge trimming knife,improve production efficiency.
7.Three types of scorers:convex to concave(three lines).convex to concave(five lines),convex to flat.
8.Two rows of scorers,realizes minimum scorer spacing is 0mm.
9.Computer control score-depth,high quality scorer,more steady .
10.Using the synchronous belt transmission ,low noise,prolong using time.
11.Standard motorized body left-right rectification system 200mm
10,NC-200 Spiral knife shear machine
A,Technical parameter:

Work wide	2200mm
Design speed	200m/min
Work speed	150-180m/min
Minimum cut paper length	500mm
Maximum paper cutting length	9999mm
Cutting paper accuracy	Uniform speed±1mm,
working power supply	380V  50Hz 50KW
Equipment size
Weight

 

1. Main performance features:

★ Can store 200 sets of orders, change the paper cutting specifications quickly and accurately, do not stop the order, and can realize the computer networking, convenient production management.
★ The knife shaft drive gear adopts precision forging steel material high frequency quenching, realize no side gap transmission, using advanced bond-free connection mode, high transmission precision.
★ The front and rear paper delivery wheels are using the sun wheel paper pressing mode, smooth delivery, uniform pressure, not easy to crush the board or cause blockage.
★ This model is the energy storage type brake (non-energy consumption brake), low energy consumption in the production process, the average electricity consumption is 1 / 3 of the ordinary NC cutting machine, saving more than 70% of the power, to achieve the goal of saving money.
★ Precision adjustable markless gear to ensure the precise engagement of the blade and balanced operation.
★ Oil bed type lubrication is distributed in each gear position for oil supply, lubrication and cooling.
★ Tool roll: high quality fine forged steel quality, after balance treatment, with good stability.

C,Main component parameters:

Part name Technology	Spec	Surfacing	Special handling
Cross-cut the upper and lower knife shaft	¢200mm	Tempering	Dynamic balance
Front and bottom transfer roller	¢150mm	Round ground chrome polished	Dynamic balance
After the lower transfer roller	¢150mm	Round ground chrome polished	Dynamic balance
Lead the paper shaft	¢160mm	Package of silica gel	Dynamic balance
Output solar wheel	¢160mm	Polyurethane	Intensive

D,Main power parameters:

Name	Power	Voltage	Rate
Main drive frequency conversion motor	42KW	380V	50HZ
Paper transfer motor	3.7KW( frequency control )	380V	50HZ

E,Main parts brand and origin:

No	Master name	Brand or origin	Remarks
01	Box frame	Self-produced	HT250
02	Knife roll	Tiangang fine forging	42CrMo
03	Full AC private service motor	East force	42KW
04	Transmission paper frequency conversion motor	Hebei Hengshui Yongshun Electric Motor Factory
05	Flying-shear servo control system	Ying wei teng
09	Up tight set	Xianyang beyond
10	With a bearing	Zhejiang five ring
11	low-voltage apparatus	Chint	Contactors, relays, and push-buttons

11,DM-DDL large hanging basket stacking machine
A,Technical parameter:

Work width	2200mm
Design speed	200m/min
Work speed	180m/min
Maximum accumulation length	2500mm
Maximum accumulation height	300mm
working power supply	380V  50Hz   25KW
Equipment size

B,Main performance features:

Basket type stacking machine, stacking height: 1800mm Can automatically count, automatic cross out, frequency conversion control lifting, baffle servo control positioning, automatic adjustment when changing the order. The paper conveying belt is controlled by frequency conversion control. The material of the first section and the fourth section of the pressure strip is made of carbon fiber rods, and the pneumatic rise and fall is controlled. The hanging basket section is a module with an output, with a section of the module with a paper connecting platform. Mechanical host: beam, column use of high quality heavy I-steel, channel steel, square pipe, surface sand grinding, spray paint; The conveying roller adopts high-quality seamless steel pipe, with precision machining and dynamic balance correction: Pneumatic system: Zhejiang Tianao cylinder, solenoid valve, pneumatic valve, pressure regulating valve, triad and other pneumatic components. Control system: conveying section conveying motor: Taibang precision gear reduction motor, Taiwan Delta frequency converter. Platform lifting control, Taiwan Delta frequency conversion controller; transverse paper delivery motor: Taiwan precision worm wheel deceleration motor; transverse paper delivery control: Taiwan Delta frequency conversion controller; rear baffle position adjustment motor: Taiwan Delta servo motor; rear baffle position adjustment control: Taiwan Delta AC servo controller; operation monitoring: Kunlun Zhongtai color touch screen; Detection and control: Taiwan Delta PLC, Omron proximity switch, photoelectric switch. Low voltage electrical: Schne ider and Siemens AC contactors, circuit breakers, relays, switch buttons, etc. Test pulse switch: Omron. Laser ranging sensor is made in Germany       

C,Main parts brand and origin:

No	Master name	Brand or origin	Remarks
01	Body frame	TianGang	Main frame # 16 channel steel
02	PU leather belt	Tianjin production
03	Frequency changer	Taiwan Delta	3.7KW
04	Across the reducer	Shandong Jinzhan speed reducer
05	Contactor	Chint
06	Roll shaft	Steel seamless steel pipe

12,ZJ fully automatic rubber-making station system
A,technical parameter:

Manual maximum amount of glue made	0.8T
The method of glue making	one-step method;one-step process
The main body stirring	Horizontal stirring
The carrier stirring	Vertical stirring
Storage tank reserves	1T
working power supply	380V  50Hz   10KW
Equipment size

B,Main performance features:

★ To provide starch adhesive for single-sided corrugated machine, glue coating machine and other glue equipment. Delivery through the rubber pump pipeline. The rubber making device is composed of carrier tank, main tank, storage tank, rubber delivery pump, rubber return pump, etc.
★ Horizontal rubber machine can prepare the main body glue and carrier glue at the same time, and mixing, large amount of rubber. The glue liquid of the rubber making room is transported to the storage bucket of each rubber equipment by the rubber pump to provide the glue liquid for the equipment.
★ The rubber system adopts circulating glue supply, the residual glue flows into the rubber square bucket, and the liquid level floating ball is automatically controlled.

C,Main component parameters:

Part name parameter	specifications;norms;standard;format;spec	Material	Power	remarks;comments on a form;remark
Horizontal main body glue mixer	1200mm×1000mm×900mm	Q345	4KW	Hebei Hengshui Motor
Vector glue mixer	¢800mm×900mm	Q345	1.5KW	Hebei Hengshui Motor
Single-sided machine, apply the glue on the rubber bucket	¢800mm×1000mm	Q345
Storage glue bucket	¢1200mm×1200mm	Q345	1.5KW	Hebei Hengshui Motor
Rubber pump motor	DN40	HT200	2.2KW	Hebei Hengshui Motor
low-voltage apparatus	Chint			Contactors, relays, and push-buttons

13.JZ-20-Automatic splicer
     A,technical parameter:

Work width	2200mm
Design speed	200m/min
Work speed	200m/min
Splicer time	0-200M/
Air system	0.4-0.9Mpa

  B,Main performance features:

Technical parameters
paper speed: 0-200M / minute (suitable for the quality of base paper)
paper time: about 1 second running speed: 0-200M / minute
applicable paper gram weight: 90-320g / m2
 maximum drum diameter: Φ1500mm l
 working pressure: 0.6-0.9MPa double-sided tape width: 30mm
PLC control system, man-machine interface operation,
paper connection operation success rate of more than 99%
using magnetic powder clutch automatic control.
Buffered roller chain drive walk.
Zero paper tail paper, new and old paper only 3cm dry adhesive mouth.
Paper rod and tooth cutting knife integrated structure, paper and cutting one step to complete.

14.ZQ steam system
Structural features:
★Production line for hot heating energy delivery device to maintain a stable operating temperature.
★All units are designed to be independent small unit for the steam system, segmented temperature control, energy saving, easy to adjust.
★By adjusting the steam pressure monitor dial to exercise control over the operating temperature, and a pressure.
★Each group has a hydrophobic unit emptying bypass, when rapid shutdown cooling equipment.
★Float trap 1/2 metal hose and connect the bypass valve, plug valve injection.
★Between the piping system and the rotary heating member in order to achieve a flexible metal hose connection, to extend the service life of the rotary joint.
★All steam pipes are made of seamless steel tubes, to ensure safety for use under normal pressure.
technical parameters:
1,steam consumption:about1.5-2T/h
2,Equipped with boiler:4t/h
3,Equipped with boiler pressure:1.25Mpa   Pipe temperature:170-200ºC

Welcome to contact us and visit us, we'd like to offer you best machines, make friends with you forever!
Wendy Gao
Website: http://czxypackmachine.en.made-in-china.com