Table Carton Strapping Semi-Automatic Strapping Machine

• Customization: Available
• Application: Household Chemicals, Hair Care Products, Cosmetics, Skin Care Products, Carbonated Drinks, Milk, Yogurt, Pure Water, Alcoholic Beverages, Fruit Drinks
• Strapping Material: Plastic Tape
• Model NO.: 1250
• Packaging: Cartons
• Automatic Grade: Semi-Automatic
• Strapping Mode: Welding Type
• Driven Type: Electric
• Structure: Pressure Strapping
• Atrap Speed: 15-18bundles/Min
• Max Strap Size: 100*1800*250mm
• Min Strap Size: 450*200*100m
• Weight: 1500kg
• Voltage: 380V
• Air Pressure: 4-6kgs/Cm
• Transport Package: Container
• Specification: computer contro
• Trademark: CZXY
• Origin: Hebei, China
• HS Code: 8441809000
• Production Capacity: 30sets/Month

Product Description

 

CZXY-1250 PP strapping machine


Main introduction
This is a full-automatic strapping machine used for strapping products using a polypropylene (PP) strap (straps for machines) for stabilizing purposes. The products to be strapped are limited within the arch, whose inner specifications can be customized according to customer requirements). Be careful for rigidity of  working materials, and don't try to strap wet,ashy, powder or too-heavy (usually max. load 80kg) packages.
This machine was designed for strapping only. We strongly recommend that this machine not be modified  and/or used for any application other than for which it was designed. Pay attention to the load-bearing capacity described in the manual. Do not use the machine until you have known all items.
This equipment is not suitable for explosive environments. It shall be specially customized if it is will be used in explosive atmospheres.
If it is used for the strapping of food or medicine products, it is recommended to use a specially  customized stainless steel machine, which should be also cleaned and disinfected with disinfectants in accordance with industry regulations.
If it is used for the strapping of corrosive goods (such as seafood, etc.), pay attention to rust protection, and do not let a corrosive liquid enter the strapping head. In case that it goes into the strapping head, it should be dried immediately to prevent the strapping head from rusting, which will result in motor overload.
In case of objects or liquids spill,scattering on the ground around the machine, immediately remove these spills to avoid the risk of personnel slipping.
We recommend using the following PP strap:

Raw material:	PP
Specifications:	Width: 5mm-9mm Thickness: 0.5mm -0.8mm
Strap coil width:	170mm- 190mm
Strap coil core inner diameter:	200mm-210mm
Strap coil core outer diameter	400mm-450mm
Maximum tension force	45 kg

Technical parameter

Size:	L1250 mm×W585 mm×H1970 mm
Package size:	L1600 mm×W800 mm× H2100 mm
Worktable height:	850 mm
Bearing capacity:	80 kg
Net weight:	185 kg
Strap width:	5mm-9 mm
Strap coil:	Coil core inner diameter 200 mm-210 mm Outside diameter 400 mm-450 mm Width (face) 170mm - 190 mm
Strapping speed:	40 beats/min.
Strapping specifications:	Min. package size: W 80 mm × H 60 mm; Max. package size: Within the arch size
Adhesion technique:	Hot melting
Adhesion type:	Bottom  adhesion,  adhesion  surface≥90%,  adhesion positional deviation≤2 mm
Tension force:	0-45 kg
Power:	600W , 4 A
Power supply:	1P, 220V, 50Hz (Refer to the nameplate)
Noise emission:	≤75 dB(A)
Adjustable items:	Arch size, and strap width
Notes:	Standard arch size: W 650 mm× H 500 mm, other sizes customizable Subject to change without further notice

Working principle
The object to be strapped is basically in the middle of the machine. Firstly, the right bar goes up, pressing the front end of the strap tightly and strapping the object, tensioning the strap on the object, then the left bar goes up, pressing at the proper position of the strap at the lower layer tightly, then the heater plate inserts between two layers of the strap, then the middle bar goes up, cutting off the strap, and at last the strap for the next strapping is sent to the right position, thus a working cycle is completed.



Wendy Gao