High Speed Automatic Double Wall 3 5 7 Layer Corrugated Box Cardboard Paperboard Carton Production Line

• Customization: Available
• After-sales Service: 24hours
• Warranty: 2 Years
• Certification: CE
• Automation: Automatic
• Suitable for: Paper
• Paper Thickness: Thick Paper
• Heating System: Steam Heating
• Width: 1800mm
• Layer: 5 Layer
• Design Speed: 180m/Min
• Working Speed: 150m/Min
• Single Facer Type: Vacuum Absorbable
• Corrugated Roller Material: 48crmo High Quality Alloy Steel
• Flute Type: Acbe as Customer Requirements
• Electric Appliance: Imported Famous Brand
• Transport Package: Plastic Film Wrapping Outside, Container
• Specification: Corrugated type: A, B, C, E Optional
• Trademark: CZXY
• Origin: Cangzhou City, Hebei Province
• HS Code: 8441809000
• Production Capacity: 3-5sets/Month

Product Description

1800-5 LAYER CORRUGATOR LINE,  Steam Heating
(Design speed 180m/min. Production Speed 3ply 150m/min,5ply 130m/min)

2/3/5/7-layer Corrugated Cardboard Production Line

Higher productivity, better paperboard quality, adoption of central control system, simple and easy operation, convenient repair and maintenance, reliable and safe, greatly lower degree of manpower requirement; mainly consist of the following equipments.

1). Mill Roll Stand (Electrical or Hydraulic)

2). Preheater (Surface Paper & Core Paper)

3). Vacuum Adsorption Single Facer

4). Overhead Conveyer Bridge

5). Gluer (Duplex, Triplex, Quadruplex, etc.)

6). Double Facer (Heating Plate & Cooling Finalize)

7). Thin Blade Slitter Scorer

8). NC. Cut-off Machine

9). Stacker & Conveyer

10). Heating System (Steam, Oil, etc.)

11). Glue Kitchen System

12). Air Compression System

13). Electrical Control System, etc.

 

 

1. ZJ-V5B Hydraulic shaftless mill roll stand
2. 

A,Technical parameters:

Working wide	1800mm
Paper diameter	MAX: 1600mm MIN:300mm
Paper width	MAX: 1850mm MIN:800mm
Weight capacity	2.5T
Paper head size	Teeth 3 inches 4 inches
brake	Spur gear type 4 points pneumatic
Working air pressure	0.4---0.8Mpa

1. Main performance characteristics:

★Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★The brake uses a multi-point brake system, a gear disc structure, equipped with a cooling fan, Yadeke pneumatic components, stable tension, and long life.
★The large-diameter spindle design, the swing arm slides smoothly, and the steel guide rails are treated with high frequency treatment, which is super wear-resistant.
★The hydraulic cylinder is installed on a twisted shaft, which does not bear radial force and is easy to maintain.

1. Hydraulic system parameters:

Working pressure	Hydraulic cylinder working range	Hydraulic cylinder working range	Hydraulic station motor power	Solenoid valve working voltage
16---18Mpa	¢125×440mm	¢80×1300mm	4KW --380V -- 50Hz	220V--50 Hz

1. Mainly purchased parts,raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Main shaft	Day steel production	¢270mm
02	Swing arm	Production by own	Resin sand gray ironHT250
03	Wallboard	Jigang prduction	Q235AWelding parts
04	Bearing	NSK
05	Main electrical appliance	SIEMENS	Contactor, relay, button
06	Hydraulic station	Shandong zaozhuang	Taiwan oil pump solenoid valve

2,paper trolley,track

1. Technical parameters:

Track length	6000mm
Paper loading method	Manual
Main frame	14 channel steel and ¢20mm cold drawn round steel

1. Structural feature:

★Track whole buried, The main frame of the 14th channel with ¢ 20mm cold drawn  round  welding,the track length 6000mm.
★Each paper with two stage paper trolley,and the paper from the two sides at the same time.

1. Mainly purchased parts, raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Track and paper trolley	TangShang or JiNan	NO14 channel steel,Q235A,steel strip
02	Bearing	C&U

3,R09B Top(core)paper preheater

A,Technical parameters:

Working wide	1800mm
Diameter of preheat roller	¢900mm
Angle adjustment range	360°
Angle shaft diameter	¢128mm×2
Steam temperature	180ºC
Steam pressure	1.2Mpa
Working power	380V    50Hz    3PH
Motor power	250W   short(S2)working system

B,Structural feature:

★Used for preheating single-sided corrugated paper and tissue paper to increase temperature, facilitate bonding, control moisture, and smooth cardboard.
★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.
★Electric adjustment angle, and angle can rotation adjustment the preheat area in the range of  360°.
★The preheating roller adopts the flat head design, which complies with the national standard of Class I pressure vessels, and is accompanied by a pressure vessel certificate.

C,Mainly purchased parts, raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Framework	Tang Steel Profile	Welded parts stress relief
02	Steam rotation joint	Quanzhou yujie
03	Preheater	Hangang or jigang	Q235Bpressure container board
04	Seat belt bearing	FuJian Fu Shan
05	RV Reducer	ShanDong DeZhou	RV75
06	Main electrical appliances	SIEMENS	Contactor, relay, button
07	Trap	Armstrong, United States	Float
08

5,RG-3-900 Triple preheater
A,Technical parameters:

Working wide	1800mm
Diameter of preheat roller	¢900mm
Angle adjustment range	360°
Angle shaft diameter	¢128mm×2
Steam temperature	180ºC
Steam pressure	1.2Mpa
Working power	380V    50Hz    3PH
Motor power	250W   short(S2)working system

B,Structural feature:

★Used for preheating single-sided corrugated paper and tissue paper to increase temperature, facilitate bonding, control moisture, and smooth cardboard.
★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable.
★Electric adjustment angle, and angle can rotation adjustment the preheat area in the range of  360°.
★The preheating roller adopts the flat head design, which complies with the national standard of Class I pressure vessels, and is accompanied by a pressure vessel certificate.

C,Mainly purchased parts, raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Framework	Tang Steel Profile	Welded parts stress relief
02	Steam rotation joint	Quanzhou yujie
03	Preheater	Hangang or jigang	Q235Bpressure container board
04	Seat belt bearing	FuJian Fu Shan
05	RV Reducer	ShanDong DeZhou	RV75
06	Main electrical appliances	SIEMENS	Contactor, relay, button
07	Trap	Armstrong, United States	Float
08

SF-18 fingerless type single facer

A,Technical Parameters:

Effective width	1800mm
Design speed	180m/min
Economic speed	100-150m/min
Paper feed range	1850--850mm
Maximum steam temperature	200ºC
Steam pressure	1.2Mpa
Working power	380V    50Hz    40KW

B,Main performance characteristics:

★Adopt hood suction structure,matched high pressure powerful fan. Gas supply and electrical control cabinet to focus on the same operation, the operating side full cover closed.
★High quality resin sand casting,wall thickness 200mm.Adopt independent gear box, Universal joint transmission structure.
★Install the lifting trolley on the conveyor bridge,Need to use the car will tile roll assembly and pressure roller, such as convenient and quick.

★Glue roller unit structure with the overall relocation,Maintenance can sway the machine at the overall maintenance,improve the working efficiency.
★The humidity control apparatus equipped with a spray, so flute type to maintain good stability of deformation, avoid dry.
★Automatic circulation system for glue, two-cylinder pneumatic  gluing device, with good cushioning effect.
★Glue department using integrated slide structure,Glue roller surface after grinding engraved with 25 lines and pit-style textured hard chrome plating.
★Corrugated roller adopt tungsten carbide dealing,diameter of the main corrugated roller¢ 346mm,Quenched→rough car→bore fine boring→shaft head shrunk-on→welding → tempering to stress→fine cars→coarse grinding→IF quenching→CNC grinding machine grinding→tungsten carbide dealing,hardness of surface is HRC58degrees.
★Active force variable frequency motor drive, energy efficient, low failure rate.
★Glue wide electric adjust to changes in the width of the paper used.
★Amount of glue size with electric adjustment, touch screen display and operation of the encoder transmission coating gap, high accuracy.
★Power and operating parts with a safety net to ensure the safety of personnel in the operation of machinery.
★The simple operation and control system, touch screen operation interface, color display interface display operation status, function selection, fault indication, elimination and parameter setting can all show that this machine has complete functions, easy operation and humanization.
★Built-in pre-adjuster with spray system to adjust core paper temperature and moisture.
★The main and auxiliary corrugated roller and pressure roller bearings are made of high temperature grease to ensure bearing life and smooth operation.

C,Main component parameters:

Part Name Craftsmanship	Specification	Material	Surface treatment
Corrugated roller	Main roll¢346mm	50CrMAo	Tungsten carbide treatment
Pressure roller	¢370mm	45#	Hardened round grinding chrome plating polishing
Glue roller	¢240mm	45#	Round grinding and pressing pit mesh chrome plating
Fixed paste roller	¢140 mm	45#	Round grinding chrome plating polishing
Preheat roller	¢400mm	Q235B	Round grinding chrome plating polishing

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Main drive motor	22KW	380V	50HZ
High-pressure suction motor	11KW	380V	50HZ
Glue reducer	100W	380V	50HZ
Glue adjustment motor	200W*2	380V	50HZ
Rubber pump motor	2.2KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Main part name	Brand or place of origin	Remarks
01	Box rack	Self-produced	HT250
02	Rotary joint and metal hose	FuJian
03	Main drive motor	Hebei hengshui yongshun motor	18.5KWInverter motor
04	RV reducer	Taiwan city-state or Wanxin
05	Bearing	C&U
06	Seat belt bearing	Zhejiang wuhuan
07	High pressure fans	Shanghai yingfa motor factory	11KW
08	Pneumatic Components	AirTac
09	The electromagnetic valve	AirTac
10	Low-voltage electrical appliances	SIEMENS	Contactor, relay, button
11	Frequency controller and PLC	Delta
12	Touch screen	Taiwan Weilun or Kunlun Tongtai

7,TQ-A-1800 Heavy type conveyor bridge
A,Technical parameters:

Working width

1800mm

 

Design speed

180m/min

Bridge layer

2  layer

Working power

380V  50Hz   13KW

B,Structural feature:

★The part of the flyover is to lift the single-sided corrugated paper produced by the single-sided machine, lift it and transport it to the glue coating machine, apply the glue to the double-sided machine, slowly convey it, and have sufficient paper storage capacity, which is convenient for changing paper and order without stopping.
★Both sides are equipped with safety barriers and security herringbone pedal operation plane is equipped with safety ladder, ensure staff safety and ease of operation.
★All roller surface after grinding hard chrome plating.
★Lifting part of independent frequency conversion drive. The high-strength jointless belt has no corrugation, and the upper layer is conveyed slowly and over a long distance, so it is not easy to break the paper.

C,Main component parameters:

Part name Craftsmanship	Specification	Material	Surface treatment
Upper paper roller and tension roller	¢155mm	45# steel	Round grinding chrome
Conveyor roller	¢210mm	45# steel	Round grinding chrome
Paper roll and paper guide roller	¢128mm	45# steel	Round grinding chrome
Paper towing shaft	¢155mm	45# steel	Round grinding chrome

D,Main parts brand and origin:

Serial number	Main part name	Brand or place of origin	Remarks
01	The bridge main skeleton	Tiangang or tanggang	NO25channel iron,NO18beam,NO12channel iron,NO63angle,60*80squal steel and so on connected.
02	Guardrail	Tiangang	Ф42mm Low pressure fluid pipe
03	Paper lifting belt	Shanghai	PVC conveyor belt
04	Cardboard conveyor belt	Hebei	Parallel transport rubber band
05	Frequency converter	TaiWan Delta
06	Bearing	Japan NSK
07	Seat belt bearing	FuJian
08	Paper width adjustment reducer	Shangdong jinbuhuan reducer
09	Paper motor(frequency)	Hebei hengshui	7.5KW
10	Conveying roller and paper roller ,over paper roller	Tiangang Seamless steel pipe
11	Low-voltage electrical appliances	SIEMENS	Contactor, relay, button
12	Timing belt	Ningbo	8m

9,GM-20 Double glue machine
A,Technical parameters:

Working width	1800mm
Design speed	180m/min
Economic speed	130--180m/min
Glue volume adjustment range	0.08-0.6mm
Number of anilox roller	32 lines
Preheating cylinder temperature range	150-180ºC
Working power	380V  50Hz   9KW
Air source system	0.4-0.9Mpa
Pressing method	Pneumatic

B,Structural feature:

★The double glue machine is a corrugated paper conveyed from the flyover. After preheating, it is coated again with glue and then pasted into the double-sided machine to paste and bond to produce three-layer five-layer cardboard.
★Frame cast iron structure, stable performance, upper middle layer preheater diameter 400mm, increase paper temperature to facilitate glue paste, double pressure roller design glue evenly, stainless steel glue groove, automatic circulation glue supply.
★after quenched of the glue roller surface,the hole machining, surface grinding and doing balancing engraved anilox pit type, coating evenly, less consumption of plastic.
★The transmission of the glue unit is directly connected by the frequency conversion motor through the reducer, and the frequency conversion control ensures that the linear speed of the glue roller is synchronized with the double-sided machine and can operate independently. Use angle sensor, PLC, touch screen man-machine interface display. According to different paper quality, different speeds automatically control the amount of glue, according to the different corrugated shape automatically adjust the gap between the pressure rollers, without accumulating errors.

C,Main component parameters:

Part name Craftsmanship	Specification	Surface treatment
Glue roller	¢268mm	Round grinding and pressing pit mesh chrome plating
Fixed paste roller	¢146mm	Round grinding chrome
Pressure roller	¢150mm	Round grinding chrome
Paper shaft	¢110mm	Round grinding chrome
Preheating cylinder	¢400mm	Round grinding chrome

1. Main dynamic parameters:

Name	Power	Voltage	Frequency
Rubber roller active motor	3KW*2	380V	50HZ
Glue adjustment speed reducer	180W	380V	50HZ
Roller gap adjustment motor	180W	380V	50HZ
Rubber pump motor	2.2KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Glue roller and paste roller	Tiangang	45# steel
02	Preheat roller	Tiangang or Jigang	Q235B Container board
03	Bearing	Japan NSK
04	Bearing with seat	FuJian
05	Pneumatic Components	AirTac
06	Low-voltage electrical appliances	SIEMENS	Contactor, relay, button
07	Glue reducer	Taiwan city-state or Wanxin
08	Main reducer	Taiwan city-state or Wanxin
09	Touch screen	Taiwan Vinylon or Kunlun Tongtai	10.4 inch
10	PLC and inverter	SIEMENS
11	Timing belt	Germany OPTIBELT
12	Trap	Armstrong, United States	Float

 

1. SM-F Double facer
2. 

A,Technical parameters:

Working width	1800mm
Design speed	180m/min
Economic speed	120-180mmin
Hot plate number	600mm×16 piece
Cooling section length	5 meters
Temperature requirements	160-180ºC
Steam pressure	0.8-1.3Mpa
Air pressure	0.5-0.6Mpa
Pneumatic pressure plate	14 groups
Working power	380V  50Hz   75KW

B,Structural feature:

★The double-sided machine is a glued single-sided corrugated paper and facial paper laminated, heated platen heating, glue paste, stereotypes to produce flat cardboard.
★Surface of hot plate is dealed with grinding, hot plate width600mm,in total 20 pieces hot plate,Minister cooling stereotypes 5m.
Hot plate is made adopt container board, enclosed pressure container certificate and inspection certificate.Internal thermal panels for partition isolation structure,s-shaped flow of steam, Steam, water separation function apparent,improve the using rate of steam.
★The hot plate adopts pneumatic pressure plate structure. The pressure plate lifting adopts pneumatic structure. 14 sets of spring pneumatic pressure plates are standard.
★The heat pipe of the heating plate controls the temperature in multiple sections and has a temperature display.
★The upper cotton webbing is automatically centered by the correcting pneumatic valve, and the double cylinder is used to control the S-shaped cotton web tensioning device. The amount of tightening is large.
★The lower belt adopts pneumatic tensioning mechanism, the structure is simple and practical, the left and right of the lower conveyor belt is automatically corrected and aligned, and it can also be adjusted manually on both sides.
★Gearbox drive unit using an independent structure, gear steel ZG-500 number for materials, the use of oil-immersed gear lubrication.
★Electrical components used internationally renowned brands, the device stable and reliable operation.
★Main drive motor for the motor frequency energy, low-speed torque, wide speed range, reliable, easy maintenance.
★The main backbone of high intensity profiles GB, solid structure, beautiful appearance, suitable for high speed working.

C,Main component parameters:

Part name Craftsmanship	Specification	Surface treatment
Upper drive rubber roller	¢800mm	Covered with wear-resistant rubber
Lower drive rubber roller	¢600mm	Covered with wear-resistant rubber
Front and rear driven belt roller	¢215mm	Round grinding chrome plating polishing
Top tension roller	¢155mm	Round grinding chrome plating polishing
Upper belt adjustment roller	¢130mm	Round grinding chrome plating polishing

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Main drive motor	75KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Main skeleton	Tiangang or lai gang production profiles	NO.36channel and NO.16 I-beam
02	Drive wallboard	HeBei  HanDan	Q345
03	Heat board	Tiangang or Jigang	Q235B container board made
04	Main drive motor	Siemens Bed	75KW Frequency motor
05	Cotton webbing	ShenYang	Cotton webbing thickness:9mm
06	Trap	Armstrong, United States	Float
07	Low-voltage electrical appliances	SIEMENS	Contactor, relay, button
08	Pneumatic Components	AirTac or sono
09	Frequency converter	SIEMENS
11	Bearing	Japan NSK
12	Bearing with seat	FuJian

 

1. NCBD thin blade slitter scorer(Zero Pressure Line)
2. 

A,Technical parameters:

Working width	1800mm
Design speed	250m/min
Economic speed	180-230m/min
Mechanical configuration	7 Knife 12 lines
Min cutting width	140mm
Minimum indentation distance	0mm
Cutter wheel positioning accuracy	±0.5mm
Horizontal movement of the whole machine	±100mm

B,Structural feature:

★The synchronous servo motor controls the row of knives and wires. Automatic reset. Precise size. Change order time is 15 seconds. The two machines can be used to change orders immediately without slowing down.
★ PLC control system, using CANopen bus system, with order management function, equipped with a synchronous signal input interface with dryer speed.
★HMI with 10.4-inch color touch screen, storage 999 orders, change orders automatically or manually for a single, fault alarm.
★Three kinds of pressure line forms:Convex against the concave(three layers line),Convex against the concave(five layers line),Convex against Flat,Three kinds of electric pressure line forms can be converted.Crimping round shades by computer control,linear, and easy to bend.
★Using thin tungsten alloy steel knife,sharp blade,long life of more than 8 million meters.
knife sharpener for computer control,automatic or manual knife sharpener,Cutting edge sharpening can be divided,improve productivity Efficiency.
★Imported synchronous belt transmission is adopted, and the thin blade holder and the crimping seat are supported by linear bearings, and the positioning size is accurate without accumulating errors.
★The cutting and crimping are driven by independent frequency conversion motors. The suction port is automatically positioned with the change order.
★With gas storage tank and low pressure protection function.

C,Main dynamic parameters:

Name	Power	Voltage	Frequency
Row of single-pole servo motors	0.45KW	380V	50HZ
Slitting inverter motor	7.5KW	380V	50HZ
Pressure line frequency conversion motor	7.5KW	380V	50HZ
Suction outlet frequency conversion motor	0.55KW	380v	50HZ

D,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Frame	ShanDong JiNan	Q345
02	Rail beam	TianJin	Q345
03	PLC Programming controller		CANopen Bus system
04	HMI	Kinco	10.4 inch
05	Row knife servo control	Kinco	500w
06	Row line servo control	Kinco	500w
07	Line change control	Kinco	500w
08	Suction control	Kinco	500w
09	Proximity switch, photoelectric switch	Japan omron
10	Relay
11	Main frequency conversion motor	HeBei	5.5KW×2
12	Horizontal motor	Shandong Jinzhan Reducer
13	Suction exhaust motor	ZheJiang	0.55kw
14	Solenoid valve, cylinder	AirTac
15	Bearing	HRB or C&U
16	Bearing with seat	ZheJiang Wuhuan
17	Tungsten alloy blade	Sichuan Boyan	¢260mm
18	Linear Guides	TaiWan	ShangYin

7.NC-180 NC cutter
A,Technical parameters:

Working width	1800mm
Design speed	180m/min
Economic speed	80-150m/min
Min. cutting length	500mm
Max. cutting length	9999mm
Cutting accuracy	±1mm,
Working power	380V  50Hz   25KW

 

1. Structural feature:

★It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management.
★Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy.
★Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.
★Around feed rollers are used  the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.
★This type of brake is energy storage type (non-energy brake), so in the process of production, the average power consumption is 1 / 3 of that of the ordinary NC cutting machine, saving more than 70% of electricity and achieving the goal of saving money.
★Exact and adjustable no gap gear to ensure precise blade engagement, running balance.
★Independent oil pump and filter are used to distribute two sets of copper pipes in each gear position to feed oil, lubricate and cool.
★Knife roller: fine quality forged steel material, the balanced, with good stability.

C,Main dynamic parameters:

Part name Craftsmanship	Specification	Surface treatment	Special treatment
Cross cutting the upper and lower knife axis	¢216mm	Conditioning	Dynamic balance
Front lower conveying roller	¢156mm	Round grinding chrome plating polishing	Dynamic balance
Rear lower conveyor roller	¢156mm	Round grinding chrome plating polishing	Dynamic balance
Paper shaft	¢160mm	Wrapped silicone	Dynamic balance
Output sun gear	¢160mm	Polyurethane	Intensive

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Main drive servo motor	18.5KW	380V	50HZ
Front feed motor	1.5KW(Frequency adjustment speed)	380V	50HZ
Rear feed motor	1.5KW(Frequency adjustment speed)	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Box rack	Self-produced	HT250
02	Knife roll	Tiangang Precision Forging	42CrMo
03	Full AC servo motor	Shanghai Futian	18.5KW
04	Paper frequency conversion motor	HeBei YongShun
05	Flying shear servo control system	Kobe, Germany
06	Motion control board	Germany MKS-CT150
07	Rotary encoder	Germany SIKI
08	Timing belt	Obi, Germany OPTIBELT
09	Tightening sleeve	XianYang ChaoYue
10	Bearing with seat	ZheJiang
11	Low-voltage electrical appliances	SIEMENS	Contactor, relay, button
12	Proximity switch	Omron Japan OMRON
13	Frequency converter	Detal
14	HMI	Kunlun State
15	Sun gear	ShenZhen

13,DM-LM Automatic small gantry stacking machine

A,Technical parameters:

Working width	1800mm
Design speed	250m/min
Economic speed	160-220m/min
Maximum stacking length	3500mm
Maximum stacking height	250mm
Working power	380V  50Hz   17KW
Equipment size	13m*2.5m*2.2m

B,Main performance characteristics:

★Gantry stacking,Changing single time is 5seconds,automatic counting, automatic cross out automatically for a single.
★Synchronized with the production management system,order management,Centralized management,do not slow down automatically for a single.
★Production management for a single waste less than 700mm.
★Crawler stacking platform,AC servo control movements,Stacking smooth, neat.
★When stacking reaches a set number of automatic frequency control smooth laterally out of paper.
★Tailgate AC servo control positioning for a single automatic, rapid, precise adjustment.
★Tailgate automatically shift for small orders stacking.
★The conveying side is equipped with an electric conveying rack as standard, and a double station trolley.
★Independent sealed control cabinets, electrical equipment operating under clean environment.
★Color touch-screen display for easy on-site operation.
★Fully automatic operation control, improve efficiency and save manpower, reduce labor intensity.

1. Main dynamic parameters:

Name	Power	Voltage	Frequency
Main conveying motor	3KW*3	380V	50HZ
Suction motor	3KW	380V	50HZ
Horizontal conveyor motor	3KW	380V	50HZ
Tailgate motor	0.75KW	380V	50HZ

D,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Frame	Tiangang	Main frame No. 16 channel steel
02	PU Leather belt	ShangHai
03	Frequency converter	Taiwan Delta	3.7KW
04	Traverse reducer	ShangDong
05	Proximity switch	Japan OMRON
06	PLC	TaiWan Delta
07	HMI	Kunlun State
08	Rotary encoder	Wuxi Ruipu
09	Contactor
10	Pneumatic Components	Taiwan Airtech

 

1. 14,ZJZ glue station system 

A,Technical parameters:

Manual glue production	0.8T
Glue making method	Two-step method
Main stirring	Horizontal stirring
Carrier agitation	Vertical stirring
Storage tank storage	1T
Working power	380V  50Hz   10KW

B,Main performance characteristics:

★Provide the starch adhesive to the corrugated single facer ,two glue machine and some other gluing equipment.
★Horizontal glue machine can meanwhile matched  with main body glue and carrier glue, and mixing, glue large.
★Glue system adopt glue cycle,rest glue go back to the glue square cylinder,Liquid level float automatic control,the back glue a bucket of glue liquid being beaten back with glue equipment storage bucket,cycle for glue,Save the glue solution,prevent the glue solution in the rubber plate pasting and caking precipitation.

15,Steam system
A,Technical parameters:

1	Steam consumption	About 1.2T/h
2	Equipped with heat source	2t/h
3	Steam pressure	1.25Mpa
4	Maximum temperature in the pipeline	170-180ºC

B,Maximum temperature in the pipeline:

★It supplies heating energy for the thermal equipment of the production line to keep the working temperature stable. ★Each unit is designed as an independent small unit steam supply system, saving energy and easy adjustment. ★Each group of hydrophobic units is equipped with an empty bypass, which cools the equipment quickly when the production is stopped. ★Floating ball trap, with emptying device, stainless steel check valve, to prevent leakage. ★The metal hose is used for flexible connection between the piping system and the rotating heating components, so as to prolong the service life of the rotating joint. ★All steam pipes in the machine are made of seamless steel pipes to ensure the safety of use under normal pressure.

C,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Rotary joint, metal hose	Quanzhou Yujie
02	Trap	BeiJing	Float
03	Globe valve, ball valve	YuanDa China
04	Check valve	Zhengzhou Yuming
05

 

Factory Manufacture Process:



Customer Visit:




Welcome to contact us and visit us, we'd like to offer you best machines, make friends with you forever!
Sara Qiu
Website: http://czxypackmachine.en.made-in-china.com