Czxy150-1800 3 Layer Automatic Paperboard Making Corrugated Cardboard Production Line

• Condition: New
• Certification: CE
• Automation: Automatic
• Suitable for: Paper
• Paper Thickness: Thick Paper
• Heating System: Steam Heating
• Model NO.: CZXY-150-1800
• Width: 1800mm
• Layer: 3 Layer
• Design Speed: 150m/Min
• Working Speed: 120m/Min
• Single Facer Type: Vacuum Absorbable
• Corrugated Roller Material: 48crmo High Quality Alloy Steel
• Flute Type: Acbe as Customer Requirements
• Corrugated Roller Diameter: 320
• Electric Appliance: Imported Famous Brand
• Transport Package: Plastic Film Wrapping Outside, Container
• Specification: Corrugated type: A, B, C, E Optional
• Trademark: CZXY
• Origin: Cangzhou City, Hebei Province
• HS Code: 8441809000
• Production Capacity: 3-5sets/Month

Product Description

WJ150-1800-type 3 layer corrugated cardboard production line
Business quotation § technical parameters                                                      


Main technical parameters and requirements in production line
Type:WJ150-1800-type 3 layer corrugated paperboard production line:

1	Effective width		1800mm	2		Design produce speed	150m/min
3	Three layer economic speed		110-150m/min	4		Five layer economic speed	---------
5	seven layer economic speed		---------	6		Maximum order change speed	---------
7	Longitudinal separation accuracy		±1mm	8		Cross-cutting precision	±1mm
note	Speed the above targets required to achieve:effective width 1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ºC heating surface temperature.
	Top paper index	100g/--180g/  Ring crush index(N.m/g)≥8    (Water containing8-10%)
	Core paper index	80g/--160g/   Ring crush index(N.m/g)≥5.5  (Water containing8-10%)
	In paper index	90g/--160g/   Ring crush index(N.m/g)≥6    (Water containing8-10%)
9	Flute combination
10	Steam requirement	The maximum pressure 16kg/cm2			Common pressure8-12kg/cm^2			Use2000kg/Hr
11	Electricity demand	AC380V 50Hz 3PH			The total power about 220KW			The practical power about 120 KW
12	Compressed air	The maximum pressure 8kg/cm2			Common pressure5-7kg/cm^2			use1m^3/min
13	Space	≈Lmin65m*Wmin8m*Hmin4m(The actual drawing to provider to provide audited prevail)

Customer owned section:

1,Steam heating system:proposal with 2000Kg / Hr of a steam boiler. Pressure:1.25Mpa steam pipeline.
2,Air compressed machine,air pipeline,glue conveying pipe.
3,Power supply,wires connected to the operation panel and line pipe.
4,Water sources,water pipelines,buckets and so on.
5,Water, electricity, gas flush mounting civil foundation.
6,Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.
7,Oil equipment,lubricating oil,hydraulic oil,lubricating grease.
8,installation,commissioning of food, accommodation. And provide installers with the installation.

 

Specification	Equipment name	QTY	Remark
ZJ-B	Hydraulic shaftless shaftless mill roll stand	3 set	¢215mm main shaft, hyperbolic heavy rocker arm, expansion type paper clip head, multi point brake, hydraulic drive lifting, about translation, on medium.
RT	Rail and Tracks	6set	The guide track is 5000mm and the trolley is welded with 10mm.
RG-1-900	Top paper preheater	1set	¢900mm roller, electric adjustment package Angle. The wrapping Angle can adjust the heating area of the paper in the range of 360°.
RG-1-900	Core paper preheater	1set	¢900mm roller, electric adjustment package Angle. The wrapping Angle can adjust the heating area of the paper in the range of 360°.
SF-320F	Corrugated single facer	1set	¢320mm corrugated main roller, hard chrome plating treatment, high efficiency and energy saving transmission rotation, the use of maintenance-free cylinder pressure, 240 rubber roller.
RG-1-900	Double pre-heating	1set	¢900mm roller, electric adjustment package Angle. The wrapping Angle can adjust the heating area of the paper in the range of 360°.
GM-20	Single layer glue machine	1set	Roller diameter 270mm. Independent variable frequency motor drive, PLC to adjust the glue gap and man-machine interface.
ZDF	Conveyor bridge	1set	Main beam 200mm channel steel, independent variable frequency motor drive paper conveyor.
SM-F	Double facer	1set	Frame 360 mm national standard channel steel, chrome-plated hot plate 600 mm *16 pieces, hot plate surface grinding, the whole process of hot plate design structure. Variable frequency motor.
FY-C	Electric Slitting creasing machine	1 set	Tungsten alloy blade,5 knives, 8 wire type. Electric adjustable knife
NC-150	NC Spiral knife cutter knives	1set	Full AC servo control, energy storage braking, die cutter structure, oil immersed gear transmission, 7 inch touch screen display.
DM-XLM	Carton stacker	1set	Servo drive platform lifting, three-stage frequency conversion transmission, automatic counting stacking discharge, import high-strength belt output, paper side standard conveyor frame.
QU	Air source system	1set	Customers provide their own air source.
DQ	Electrical control cabinet system	1set	Electric control system: adsorption single-sided machine, driving part, double-sided machine, glue machine are all using frequency conversion motor, Delta frequency conversion control system. The operation interface is simple and convenient, and the speed display control cabinet is equipped with the speed display, unit call and emergency stop functions of each unit.
ZQ	Steam system	1set	Including pipe valves, traps, instruments and other steam components in the equipment, customer's own heat source and pipeline.
ZJZ	Glue station system	1set	The pipeline customer is prepared.The glue device is composed of carrier tank, main tank, storage tank, and glue pump and return pump.

1.ZJ-B hydraulic shaftless mill roll stand
A,Technical parameters:

Working wide	1800mm
Paper diameter	MAX: 1500mm MIN:300mm
Paper width	MAX: 1800mm MIN:600mm
Weight capacity	3T
Paper head size	Teeth 3 inches 4 inches
brake	Gear disc multi point pneumatic
Working air pressure	0.4---0.8Mpa

1. Main performance characteristics:

★ Use full hydraulic drive to complete the base paper clamping, loosening, moving to the center, left and right translation and other actions, the base paper lifting hydraulic drive.
★ The brake adopts multi-point brake system, toothed disc structure, equipped with cooling fan, Airtek pneumatic components, stable tension, super long life.
★ Large diameter spindle design, swing arm sliding smoothly, after high-frequency treatment of steel insert guide, super wear-resistant,
★ The hydraulic cylinder is arranged by stranded shaft type, does not bear radial force, easy maintenance.

1. Hydraulic system parameters:

Working pressure	Hydraulic cylinder working range	Hydraulic cylinder working range	Hydraulic station motor power	Solenoid valve working voltage
16---18Mpa	¢100×440mm	¢63×1300mm	3.7KW --380V -- 50Hz	220V--50 Hz

1. Mainly purchased parts,raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Main shaft	Day steel production	¢242mm
02	Swing arm	Production by own	Resin sand gray ironHT200
03	Wallboard	Jigang prduction	Q235AWelding parts
04	Bearing	C&U
05	Main electrical appliance	Chint	Contactor, relay, button
06	Hydraulic station	Taiwan oil pump solenoid valve

2,Paper trolley track
A,Technical parameters:

Track length	6000mm
Earth rail trough	Single slot
Main frame	14 channel steel and ¢20mm cold drawn round steel

B,Structural feature:

★ The track is buried as a whole, and the main frame is welded with ¢20mm cold-drawn round steel. The length of the track is 6000mm.
★ Each paper holder is equipped with two paper trolley from both sides of the paper can be loaded at the same time. Push the web into place.

C,Mainly purchased parts, raw materials and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Track and paper trolley	Tanggang or Jigang	NO14 channel steel,Q235A,steel strip
02	Bearing	C&U

3,R900B Top(core) paper preheater

A,Technical parameters:

Working wide	1800mm
Diameter of preheat roller	¢900mm
Angle adjustment range	0°-360°
Angle shaft diameter	¢600mm×2
Steam temperature	200ºC
Steam pressure	1.2Mpa
Working power	380V    50Hz    3PH
Motor power	250W    short(S2)working system

B,Structural feature:

★ Used for preheating single-side corrugated paper and face paper, improve the temperature, conducive to bonding, moisture control, cardboard flat
★ The surface of each roll is polished and chrome-plated. The surface friction is small and durable.
★ Electric adjustment wrap Angle, wrap Angle can be rotated in 360° range to adjust the heating area of the paper.
★ Preheating roller adopts flat head design.

C,Mainly purchased parts, raw materials and origin

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Framework	Tang Steel Profile	Welded parts stress relief
02	Steam rotation joint	Quanzhou yujie
03	Preheater	Hangang or jigang	Q235Bpressure container board
04	Seat belt bearing	Zhejiang Fifth Ring
05	RV Reducer	ShanDong DeZhou	RV75
06	Main electrical appliances	Chint	Contactor, relay, button

4,R900B Double pre-heating

A,Technical parameters:

Working wide	1800mm
Diameter of preheat roller	¢900mm
Angle adjustment range	0°-360°
Angle shaft diameter	¢600mm×2
Steam temperature	200ºC
Steam pressure	1.2Mpa
Working power	380V    50Hz    3PH
Motor power	250W  short(S2)working system

B,Structural feature:

★ Used to preheat single-sided corrugated paper and face paper, improve the temperature, conducive to bonding, moisture control, cardboard flat
★ Roller surface grinding and hard chrome plating treatment, surface friction is small, durable.
★ Electric adjustment package Angle, package Angle can be rotated in 360° range to adjust the paper heating area.
★ The preheating roller adopts the flat head design, which conforms to the national standard of a type of pressure vessel, and has a pressure vessel certificate.

C,Mainly purchased parts, raw materials and origin

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Framework	Tang Steel Profile	Welded parts stress relief
02	Steam rotation joint	Quanzhou yujie
03	Preheater	Hangang or jigang	Q235Bpressure container board
04	Seat belt bearing	Zhejiang Fifth Ring
05	RV Reducer	ShanDong DeZhou	RV75
06	Main electrical appliances	Chint	Contactor, relay, button

5,SF-320F Single facer

A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Economic speed	120-150m/min
Paper feed range	1800--800mm
Steam temperature	120ºC
Steam pressure	1.2Mpa
Working power	380V  50Hz   15KW

B,Structural feature:

★ Main corrugated roller: ¢320mm (depending on the type of corrugated), pressure roller ¢325mm, preheating roller ¢400mm.
★ Negative pressure design, low heat loss, so that the core paper can be evenly compressed and attached to the surface of the corrugated roller, so that the corrugated better forming, because the pressure is uniform, the top of the corrugated can be better, evenly coated with glue, so that the single-sided corrugated paper is better.
★ Corrugated roller is made of 48CrMo high quality alloy steel, tempered, medium frequency quenching, surface after grinding hard chrome plating treatment, surface hardness HV1120 degrees or more.
★ Corrugated roller, pressure roller, etc., adopts a cylinder control system with high stability, and has a pressure control buffer effect.
★ The amount of glue is controlled by electric adjustment, and the glue separator is electric.
★ Gluing system, in addition to easy cleaning, more conducive to maintenance, repair work.
★ Simple operation control system, touch screen operation interface, with color map display operation status, function selection, fault indication, exclusion and parameter setting, etc., can show that the machine is fully functional, easy to operate and humanized.
★ Built-in adjuster with spray system to adjust core paper temperature and moisture.
★ The main and auxiliary corrugated roller and pressure roller bearings are made of high temperature grease to ensure the bearing life and smooth operation.

C,Main component parameters:

Part name Craftsmanship	Specification	Material	Surface treatment
Corrugated roller	Main roll ¢320mm	48CrMAo Alloy steel	Chrome plating
Pressure roller	¢325mm	45# steel	Hardened round grinding chrome plating polishing
Glue roller	¢240mm	45# steel	Round grinding and pressing pit mesh chrome plating
Fixed paste roller	¢140mm	45# steel	Round grinding chrome
Preheat roller	¢400mm	Q235B	Round grinding chrome
Paper guide roller	¢110 mm	45# steel	Round grinding chrome

D,Main dynamic parameter:

Name	Power	Voltage	Frequency
Main drive motor	22KW	380V	50HZ
High-pressure suction motor	22KW	380V	50HZ
Adjustable glue push rod	100W	380V	50HZ
Glue adjustment motor	120W*2	380V	50HZ
Motor of glue department	2.2KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Main part name	Brand or place of origin	Remarks
01	Box rack	Self-produced	HT250
02	Rotary joint and metal hose	FuJian
03	Main drive motor	Hebei	22KW variable frequency motor
04	RV reducer	Taiwan city-state or Wanxin
05	Bearing	C&U
06	Seat belt bearing	Zhejiang Fifth Ring
07	High pressure fans	Tangshan Shangwei	22KW
08	Pneumatic Components	Sono
09	The electromagnetic valve	Sono
10	Low-voltage electrical appliances	Chint	Contactor, relay, button

6,ZDF-1800 Conveyor bridge

A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Bridge layer	1 layer
Working power	380V  50Hz   6KW

B,Structural feature:

★ The flyover part is to lift the single-sided corrugated paper produced by the single-sided machine, lift and transport it to the gluing machine after gluing, enter the double-sided machine for laminating, slow transportation, with sufficient paper storage, convenient for not stopping for paper change, the use of electric correction, automatic tension control, so that the single-sided corrugated paper alignment and tightening.
★ This part is the main beam of No. 16 channel steel, No. 16 I-steel, No. 63 Angle steel, columns and other connections, reasonable structure. High speed does not jitter. Transportation, storage part of the galvanized steel plate, low friction, climbing ladder 2 sets, both sides of the 1.2 inch safety guardrail. High strength herringbone pedal to ensure the safety of personnel and convenient operation.
★ Lift part independent frequency conversion drive. High strength non-joint belt corrugation without indentation, the upper layer slow long-distance transmission, not easy to break paper.
★ Both sides of the hydraulic support are equipped with adjustable roller to ensure the balance of tension at both ends of the paper and uniform preheating.

C,Main dynamic parameters:

Name	Power	Voltage	Frequency
Single-facer corrugated paper lifting motor	3KW	380V	50HZ
Bridge adsorption fan	3KW	380V	50HZ
Adjusting board wide motor	250W	380V	50HZ

D,Main parts brand and origin:

Serial number	Main part name	Brand or place of origin	Remarks
01	The bridge main skeleton	Tiangang or tanggang	No. 16 channel steel, No. 16 I-beam steel, No. 12 channel steel, No. 63 Angle steel, 40*80 square steel and so on.
02	Guardrail	Tiangang	Ф42mm Low pressure fluid pipe
03	Paper lifting belt	Shanghai	PVC conveyor belt
04	Cardboard conveyor belt	Hebei	Parallel transport rubber band
05	Frequency converter	Delta or HuiChuan
06	Bearing	C&U
07	Seat belt bearing	Zhejiang Fifth Ring
08	Paper width adjustment reducer	Shangdong jinbuhuan reducer
09	Paper motor(frequency)	Hebei hengshui
10	Conveying roller and paper roller ,over paper roller	Tiangang Seamless steel pipe	Chrome plating
11	Low-voltage electrical appliances	Chint	Contactor, relay, button

7,GM-20 Single layer glue machine
A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Economic speed	120m/min
Glue volume adjustment range	0.08-0.6mm
Number of anilox roller	32 lines
Preheating cylinder temperature range	150-200ºC
Working power	380V  50Hz   7KW
Air source system	0.4-0.9Mpa
Pressing method	Pneumatic

B,Structural feature:

★ The single-layer gluing machine is the corrugated paper transported from the bridge, which is preheated and heated, then coated with glue again, and then enters the double-sided machine for gelatinization and lamination to produce three layers of cardboard.
★ Frame cast iron structure, stable performance, the upper and middle preheater diameter 320mm, improve the paper temperature to facilitate glue gelatinization, double press roller design glue uniform, stainless steel glue tank, automatic circulation of glue supply.
★ After the surface of the roller is tempered, the inner hole is processed, and the surface of the dynamic balance is finely ground and engraved with a pit pattern. Large diameter uniform roller dynamic balance treatment, copper plate scraping glue, glue uniform, save glue, save steam, cardboard flat
★ The transmission of the gluing unit is directly connected by the variable frequency motor through the reducer structure, and the linear speed of the gluing roller is synchronized with the double-sided machine by the variable frequency control. Angle sensor, PLC, touch screen man-machine interface display. According to different paper, different speed automatic control of the amount of glue, according to different types of roller automatically adjust the gap, no accumulation error.

C,Main component parameters:

Part name Craftsmanship	Specification	Surface treatment
Glue roller	¢270mm	Round grinding and pressing pit mesh chrome plating
Fixed paste roller	¢140mm	Round grinding chrome
Pressure roller	¢110mm	Round grinding chrome
Paper shaft	¢70mm	Round grinding chrome
Preheating cylinder	¢400mm	Round grinding chrome

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Rubber roller active motor	3.7KW*1	380V	50HZ
Glue adjustment speed reducer	200W	380V	50HZ
Roller gap adjustment motor	200W	380V	50HZ
Rubber pump motor	2.2KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Glue roller and paste roller	Tiangang	45# steel
02	Preheat roller	Tiangang or Jigang	Q235B Container board
03	Bearing	C&U
04	Bearing with seat	Zhejiang Fifth Ring
05	Pneumatic Components	AirTac
06	Low-voltage electrical appliances	Chint	Contactor, relay, button
07	PLC and inverter	Delta

8,SM-F Double facer

A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Economic speed	100-150m/min
Hot plate number	600mm×16piece
Cooling section length	4meters
Temperature requirements	160-200ºC
Steam pressure	0.8-1.3Mpa
Air pressure	0.5-0.6Mpa
Working power	380V  50Hz   70KW

B,Structural feature:

★ Double-sided machine is glued single-sided corrugated paper and face paper, heating board heating, glue gelatinization, stereotyped production of flat cardboard.
★ The surface of the heating plate is grinded, the width of the hot plate is 600mm, a total of 16 heating plates, the hot plate plane plating process, the cooling length is 4 meters. The inside of the hot plate is a partition isolating structure, which makes the steam flow in an S-shape, and the steam and water separation function is obvious, which improves the steam utilization rate. The heating plate is made of a container plate, which meets the national standard of a class of pressure vessels, with a pressure vessel certificate and inspection certificate.
★ The hot plate adopts pneumatic pressure plate structure. Pressure plate lifting adopts pneumatic structure. 10 spring pneumatic pressure plates are standard
★ The heat conduction pipe of the heating plate is divided into several sections to control the temperature, and the temperature display is provided.
★ Cotton webbing through the correction pneumatic valve, manual correction is centered, using double cylinder control S-type cotton webbing tensioning device. A large amount of tightening,
★ The lower belt adopts pneumatic tensioning mechanism, the structure is simple and practical, and the lower conveyor belt can automatically correct the deviation and adjust the center, and can also be manually adjusted on both sides.
★ The surface of the drive roller is coated with wear-resistant adhesive, in a herringbone structure, and with a medium height to ensure the smooth output of the cardboard.
★ The driving gear is made of cast steel ZG-500 material, and the gear is lubricated by oil immersion.
★ Electrical components using international well-known brands, devices work stably, reliable operation.
★ The main drive motor is variable frequency speed regulating motor, low speed torque, wide speed regulating range, energy saving and high efficiency.
★ The main skeleton adopts high strength national standard profile, solid structure, beautiful appearance, suitable for high-speed work.

C,Main component parameters:

Part name Craftsmanship	Specification	Surface treatment
Upper drive rubber roller	¢700mm	Covered with wear-resistant rubber
Lower drive rubber roller	¢700mm	Covered with wear-resistant rubber
Front and rear driven belt roller	¢200mm	Round grinding chrome plating polishing
Top tension roller	¢120mm	Round grinding chrome plating polishing
Upper belt adjustment roller	¢120mm	Round grinding chrome plating polishing

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Main drive motor	70KW	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Main skeleton	Tiangang or lai gang production profiles	NO.40channel and NO.16 I-beam
02	Drive wallboard	HeBei  HanDan	Q345
03	Heat board	Tiangang or Jigang	Q235B container board made
04	Main drive motor	Hengshui, Hebei Province	30 KW Frequency motor
05	Cotton webbing	ShenYang	Cotton webbing thickness:9mm
06	Trap	Beijing drain Valve Factory	Float
07	Low-voltage electrical appliances	Chint	Contactor, relay, button
08	Pneumatic Components	AirTac or sono
09	Frequency converter	Delta
10	Bearing	C&U
11	Bearing with seat	Zhejiang Fifth Ring

9,FY-C Electric Slitting creasing machine
A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Max. speed	150m/min
Mechanical configuration	5 Knife 8 lines
Min cutting width	160mm
Minimum creasing width	70mm
Cutter wheel positioning accuracy	±0.5mm
Horizontal movement of the whole machine	±100mm

B,Structural feature:

★ Synchronous motor electric control knife, manual wiring. Precise size.
★ Two kinds of pressure line form: convex to concave, convex to flat, two kinds of pressure line form can be automatically converted. The depth of the press wheel can be automatically controlled by the computer, and the line shape is good and easy to bend.
★ Using thin tungsten steel alloy knife, sharp blade, service life of more than 8 million long meters. Knife sharpening is electric control, automatic knife sharpening or manual knife sharpening, can be edge cutting edge sharpening, improve production efficiency.
★ Imported synchronous belt drive, thin cutter seat and linear bearing support, accurate positioning size, no accumulation error.
★ Scuttling and pressing line are driven by independent variable frequency motor.

C. Main dynamic parameters:

name	power	Voltage	frequency
Row of single pole line servo motor	0.37KW	380V	50HZ
Slitting variable frequency motor	4KW	380V	50HZ

D, Brand and origin of main components:

serial number	main item name	brand or origin	Remark
01	frame	Shandong Jinan Steel	Q345
02	Solenoid valve, cylinder	AirTac Taiwan
03	bearing	HRB or C&U
04	Pillow block bearing	Zhejiang Fifth Ring
05	Tungsten Alloy Blades	Sichuan Boyan	¢ 260mm _

10,NC-150 NC Spiral knife cutter knives
A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Economic speed	100-140m/min
Min. cutting length	500mm
Max. cutting length	9999mm
Cutting accuracy	±1mm
Working power	380V  50Hz  30KW

 

1. Structural feature:

★ Can store 200 groups of orders, change the cutting paper specifications quickly and accurately, without stopping the order, and can achieve computer networking, convenient production management.
★ Tool shaft transmission gear adopts high frequency hardening of precision forged steel material to achieve no backlash transmission, and adopts advanced keyless connection mode to achieve high transmission accuracy.
★ Circular die machine configuration, servo motor direct drive, high die cutting precision, die cutting stick small straight design, low inertia, energy saving and high efficiency, plus color identification system
★ Before and after the paper feed wheel are using the sun wheel press paper, smooth transmission, uniform pressure, not easy to crush the board or cause blockage.
★ This model is energy storage braking (non-energy consumption braking), low energy consumption in the production process, the average power consumption is 1/3 of the ordinary NC cutting machine, saving more than 70% of electricity, to achieve the goal of saving money.
★ Precision adjustable no-backlash gear, to ensure accurate mesh, running balance.
★ Oil bed lubrication is distributed in each gear position for oil supply, lubrication and cooling.
★ Knife roll: high quality precision forged steel, balanced treatment, with good stability.

C,Main dynamic parameters:

Part name Craftsmanship	Specification	Surface treatment	Special treatment
Cross cutting the upper and lower knife axis	¢200mm	Conditioning	Dynamic balance
Front lower conveying roller	¢156mm	Round grinding chrome plating polishing	Dynamic balance
Rear lower conveyor roller	¢156mm	Round grinding chrome plating polishing	Dynamic balance
Paper shaft	¢160mm	Wrapped silicone	Dynamic balance
Output sun gear	¢160mm	Polyurethane	Intensive

D,Main dynamic parameters:

Name	Power	Voltage	Frequency
Main drive servo motor	22KW	380V	50HZ
Paper feed motor	1.5KW(Frequency adjustment speed)	380V	50HZ

E,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Box rack	Self-produced	HT250
02	Knife roll	Tiangang Precision Forging	42CrMo
03	Full AC servo motor	Faith	22KW
04	Paper frequency conversion motor	Hebei Hengshui Yongshun electric machine factory
05	Flying shear servo control system	Faith
06	Tightening sleeve	XianYang ChaoYue
07	Bearing with seat	Zhejiang Fifth Ring
08	Low-voltage electrical appliances	Chint	Contactor, relay, button

11,DM-XLM Carton stacker
A,Technical parameters:

Working width	1800mm
Design speed	150m/min
Economic speed	120-150m/min
Maximum stacking length	3500mm
Maximum stacking height	150mm
Working power	380V  50Hz  17KW

B,Main performance characteristics:

★ Gantry type stacking. Order change time 5 seconds, can automatically count, automatic cross out, automatic order change.
★ Synchronize with the production management system, order management, centralized management, automatic order change without slowing down.
★ The waste of raw tube change is less than 700mm.
★ Crawler type stacking platform, AC servo control lifting, stacking smooth and neat;
★ When the stacking reaches the set amount, the frequency conversion control automatically and smoothly horizontal paper discharge;
★ Tailgate AC servo control positioning, automatic, fast and accurate adjustment when changing orders;
★ Tailgate can be automatically shifted, suitable for small order stacking;
★ The conveying side is standard with electric conveying frame and double station trolley.
★ Independent sealed control cabinet, electrical equipment in dust-free, environment operation;
★ Color touch screen display, easy to operate.
★ Automatic operation control, improve efficiency, save manpower, reduce the labor intensity of operators;

C,Main parts brand and origin:

Serial number	Name of main parts	Brands or place of origin	Remarks
01	Frame	Tiangang	Main frame No. 16 channel steel
02	PU Leather belt	ShangHai
03	Frequency converter	Taiwan Delta	3.7KW
04	Horizontal reducer	ShanDong
05	Contactor	Schneider
06	Roller shaft	Tian Steel seamless steel pipe

12,ZJ-Glue station system
A,Technical parameters:

The maximum amount of glue made by hand	1 T
Glue-making method	two-step method
Bulk stirring	Horizontal stirring
Carrier stirring	Vertical mixing
Storage tank capacity	1T
Working power supply	380V  50Hz  5KW

B,Main performance characteristics:

★Provide starch adhesive for single side corrugating machine, glue coating machine and other glue equipment. Through the rubber pump pipe. The glue making device is composed of carrier tank, main tank, storage tank, glue pump and glue pump.
★Horizontal glue making machine can prepare the main glue and carrier glue at the same time, and mix and stir, large amount of glue. The glue liquid in the storage bucket of the glue room is transported to the storage bucket of each glue equipment by the glue pump to provide the glue liquid for the equipment.
 

C. Parameters of main components

Component name	Specification	Material	power	remarks
Horizontal body glue mixer	1200mm×1000mm×900mm	Q345	4KW	Hebei Hengshui Electric Machine
Carrier mixer	¢800mm×900mm	Q345	1.5KW	Hebei Hengshui Electric Machine
Single facer machine, glue glue bucket	¢800mm×1000mm	Q345
Glue storage bucket	¢1200mm×1200mm	Q345	1.5KW	Hebei Hengshui Electric Machine
Low-voltage appliance	Schneider			Contactors, relays, buttons

13,Steam System
A. Technical parameters:

1	Steam consumption	About 1.2T/h
2	Use a heat source	2t/h
3	Steam pressure	1.25Mpa
4	Maximum temperature inside the pipe	170-200ºC

B. Main performance characteristics:

★ Deliver heating energy for each heat equipment in the production line to maintain the stability of the working temperature. ★ Each unit is designed as an independent small unit steam supply system, saving energy and convenient adjustment. ★ Each group of drain units are equipped with a drain bypass, and the equipment is cooled rapidly when it is stopped. ★ Float trap, with empty device, stainless steel check valve to prevent leakage. ★ The pipe system and the rotating heating parts are flexibly connected with metal hoses to extend the service life of the rotating joint. ★ All organic internal steam pipes are made of seamless steel pipes to ensure the safety of use under normal pressure.

C,Main parts brand and origin:

No.	Name	Brand or origin	remarks
01	Swivel joint, metal hose	Quanzhou Yujie
02	Steam trap	Peking	Float ball type
03	Globe valve, ball valve	China Yuanda
04	Check valve	Zhengzhou Yuming